- Home/
- Comparison/
- Telescopic Forklift/
- JCB 550-170 vs. Merlo 50.16MCSS
JCB 550-170 vs. Merlo 50.16MCSS
6 reasons to buy JCB 550-170:
Sizes
Clearance | 400 mm and 330 mm | 17 % more or 70 mm |
Operation
Hydraulic system fluid volume | 149.9 l. and 130 l. | 13 % more or 19.9 l. |
Lifting
Maximum lifting height | 16700 mm and 16400 mm | 2 % more or 300 mm |
Maximum load at maximum height | 2268 kg and 3000 kg | 24 % less or 732 kg |
Hydraulic system
Pump bandwidth | 162 l/min and 120 l/min | 26 % more or 42 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
10 reasons to buy Merlo 50.16MCSS:
Sizes
Swing radius outside tyres | 4050 mm and 4100 mm | 1 % less or 50 mm |
Operation
Fuel Capacity | 155 l. and 124.9 l. | 19 % more or 30.1 l. |
Generator current strength | 90 amperes and 85 amperes | 6 % more or 5 amperes |
Motor
Full power | 107 kW and 74.6 kW | 30 % more or 32.4 kW |
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Lifting
Maximum lifting capacity | 5000 kg and 4535.9 kg | 9 % more or 464.1 kg |
Maximum front radius | 13400 mm and 12600 mm | 6 % more or 800 mm |
Maximum load at maximum radius | 1000 kg and 499 kg | 50 % more or 501 kg |
Gear box
Maximum forward speed | 40 km/h and 29 km/h | 27 % more or 11 km/h |
Neutral reasons:
Sizes
Wheelbase | 2750 mm and 2970 mm |
Headroom | 2690 mm and 2950 mm |
Length up to fork surface | 6360 mm and 6380 mm |
Between tyres width | 2440 mm and 2400 mm |
Operation
Working weight | 12160.8 kg and 14200 kg |
Operating voltage | 12 V and 12 V |
Tyre size | 17.5-25 16PR and 18-22.5 16PR |
Motor
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | Double-flow pump with a filter on the suction side and a filter at the output, enables the simultaneous fluid emission / reduction and increased / intake and axial piston with controlled flow rate with load sensing |
Overflow valve pressure | 25993.2 kPa and 23000 kPa |
Gear box
Transmission type | Transmission powershift with built-in torque converter and hydrostatic |
Images
Sizes
1. Length up to fork surface | 6360 mm | 1. Length up to fork surface | 6380 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2400 mm |
3. Headroom | 2690 mm | 3. Headroom | 2950 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 2970 mm |
5. Clearance | 400 mm | 5. Clearance | 330 mm |
Lifting
6. Maximum lifting height | 16700 mm | 6. Maximum lifting height | 16400 mm |
7. Maximum front radius | 12600 mm | 7. Maximum front radius | 13400 mm |