- Home/
- Comparison/
- Telescopic Forklift/
- Merlo P 55.9 CS vs. Gehl DL7-44
Merlo P 55.9 CS vs. Gehl DL7-44
5 reasons to buy Merlo P 55.9 CS:
Sizes
Clearance | 450 mm and 400 mm | 11 % more or 50 mm |
Operation
Fuel Capacity | 150 l. and 114 l. | 24 % more or 36 l. |
Lifting
Maximum load at maximum radius | 2000 kg and 453.6 kg | 77 % more or 1546.4 kg |
Maximum lifting capacity | 5500 kg and 3175.1 kg | 42 % more or 2324.9 kg |
Gear box
Maximum forward speed | 40 km/h and 35.4 km/h | 11 % more or 4.6 km/h |
8 reasons to buy Gehl DL7-44:
Sizes
Swing radius outside tyres | 3700 mm and 3820 mm | 3 % less or 120 mm |
Operation
Hydraulic system fluid volume | 170 l. and 110 l. | 35 % more or 60 l. |
Motor
Power measured at | 2500 rev / min and 2400 rev / min | 4 % more or 100 rev |
Lifting
Maximum load at maximum height | 2721.6 kg and 5500 kg | 51 % less or 2778.4 kg |
Maximum front radius | 9200 mm and 4600 mm | 50 % more or 4600 mm |
Maximum lifting height | 13500 mm and 8600 mm | 36 % more or 4900 mm |
Hydraulic system
Pump bandwidth | 162.8 l/min and 150 l/min | 8 % more or 12.8 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Neutral reasons:
Sizes
Length up to fork surface | 5100 mm and 6300 mm |
Between tyres width | 2400 mm and 2500 mm |
Headroom | 2485 mm and 2400 mm |
Wheelbase | 3000 mm and 3300 mm |
Operation
Working weight | 10320 kg and 10546 kg |
Tyre size | 17.5-25EM20 and 13.00x24 G2 12 layers |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Manufacturer | Deutz and John Deere |
Hydraulic system
Type of pump | load sensing and open center, double section |
Overflow valve pressure | 22500 kPa and 20684.3 kPa |
Gear box
Transmission type | hydrostatic and powershift transmission |
Images
Sizes
2. Between tyres width | 2400 mm | 2. Between tyres width | 2500 mm |
3. Headroom | 2485 mm | 3. Headroom | 2400 mm |
4. Wheelbase | 3000 mm | 4. Wheelbase | 3300 mm |
5. Clearance | 450 mm | 5. Clearance | 400 mm |
1. Length up to fork surface | 5100 mm | 1. Length up to fork surface | 6300 mm |
Lifting
6. Maximum lifting height | 8600 mm | 6. Maximum lifting height | 13500 mm |
7. Maximum front radius | 4600 mm | 7. Maximum front radius | 9200 mm |