- Home/
- Comparison/
- Self-Powered Crane/
- Grove GMK5120B vs. Terex AC70
Grove GMK5120B vs. Terex AC70
10 reasons to buy Grove GMK5120B:
Operation
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Axels number | 5 and 4 | 20 % more or 1 |
Gear box
Maximum forward speed | 85 km/h and 80 km/h | 6 % more or 5 km/h |
Carrying part engine
Full power | 350 kW and 298.3 kW | 15 % more or 51.7 kW |
Maximum torque | 2300 Nm and 1850 Nm | 20 % more or 450 Nm |
Booms
Maximum angle of ascent | 83 degrees and 78 degrees | 6 % more or 5 degrees |
Maximum lifting capacity | 108862.2 kg and 70000 kg | 36 % more or 38862.2 kg |
Minimum operating radius | 2.4 m and 3 m | 20 % less or 0.6 m |
Maximum working radius | 45.7 m and 42 m | 8 % more or 3.7 m |
Rotation speed | 1.7 rev / min and 1.6 rev / min | 6 % more or 0.1 rev |
3 reasons to buy Terex AC70:
Sizes
Upperstructure rear swing radius | 3650 mm and 4220 mm | 14 % less or 570 mm |
Carrying part engine
Torque measured at | 1200 rev / min and 1080 rev / min | 10 % more or 120 rev |
Booms
Sections number | 8 and 5 | 37 % more or 3 |
Neutral reasons:
Sizes
Hauler length | 11940 mm and 8248 mm |
Transport length | 14468 mm and 9963 mm |
Transport width | 3070 mm and 2550 mm |
Transport height | 3910 mm and 3830 mm |
Width with extended supports | 7500 mm and 6550 mm |
Operation
Tyre size | 20.5R25 and 14.00R25 |
Operating voltage | 24 V and 24 V |
Haul truck fuel volume | 400 l. and 400 l. |
Gear box
Transmission type | Daimler Chrysler G240-16 and DaimlerChrysler gearshift pattern G 210-16 |
Forward gears number | 16 and 16 |
Reverse gears number | 2 and 2 |
Carrying part engine
Manufacturer | Mercedes-Benz and Daimler Chrysler |
Model | OM502LA and OM 457 LA |
Images
Sizes
1. Transport length | 14468 mm | 1. Transport length | 9963 mm |
2. Transport width | 3070 mm | 2. Transport width | 2550 mm |
3. Transport height | 3910 mm | 3. Transport height | 3830 mm |
6. Width with extended supports | 7500 mm | 6. Width with extended supports | 6550 mm |
7. Hauler length | 11940 mm | 7. Hauler length | 8248 mm |
8. Upperstructure rear swing radius | 4220 mm | 8. Upperstructure rear swing radius | 3650 mm |
Booms
11. Minimum operating radius | 2.4 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 45.7 m | 12. Maximum working radius | 42 m |
13. Maximum angle of ascent | 83 degrees | 13. Maximum angle of ascent | 78 degrees |