- Home/
- Comparison/
- Self-Powered Crane/
- Krupp KMK5120 vs. Kato 4100
Krupp KMK5120 vs. Kato 4100
7 reasons to buy Krupp KMK5120:
Operation
| Axels number | 5 and 4 | 20 % more or 1 |
Carrying part engine
| Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
| Full power | 370 kW and 309 kW | 16 % more or 61 kW |
| Maximum torque | 2020 Nm and 1850 Nm | 8 % more or 170 Nm |
| Torque measured at | 1600 rev / min and 1200 rev / min | 25 % more or 400 rev |
Booms
| Maximum angle of ascent | 84 degrees and 83 degrees | 1 % more or 1 degrees |
| Max. height at max. lifting angle without boom | 41.8 m and 18 m | 57 % more or 23.8 m |
5 reasons to buy Kato 4100:
Sizes
| Upperstructure rear swing radius | 2600 mm and 4319 mm | 40 % less or 1719 mm |
Operation
| Haul truck fuel volume | 400 l. and 378.5 l. | 5 % more or 21.5 l. |
Gear box
| Forward gears number | 6 and 5 | 17 % more or 1 |
Booms
| Sections number | 7 and 4 | 43 % more or 3 |
| Minimum height at maximum lifting angle | 11.8 m and 14 m | 16 % less or 2.2 m |
Neutral reasons:
Sizes
| Transport length | 15011.4 mm and 13250 mm |
| Transport width | 2996.2 mm and 2750 mm |
| Transport height | 3785.6 mm and 3930 mm |
| Width with extended supports | 8205.2 mm and 7400 mm |
| Hauler length | 13539.2 mm and 11430 mm |
Operation
| Operating voltage | 24 V and 24 V |
| Tyre size | 16R25/20.5R25 and 445/95 R25 177E |
Gear box
| Transmission type | Allison automatic CLBT 755 and automatic |
| Reverse gears number | 1 and 1 |
Carrying part engine
| Model | OM 442 LA and D12A 420 (Euro 2) |
| Manufacturer | Mercedes-Benz and Volvo |
Images
Sizes
| 1. Transport length | 15011.4 mm | 1. Transport length | 13250 mm |
| 2. Transport width | 2996.2 mm | 2. Transport width | 2750 mm |
| 3. Transport height | 3785.6 mm | 3. Transport height | 3930 mm |
| 6. Width with extended supports | 8205.2 mm | 6. Width with extended supports | 7400 mm |
| 7. Hauler length | 13539.2 mm | 7. Hauler length | 11430 mm |
| 8. Upperstructure rear swing radius | 4319 mm | 8. Upperstructure rear swing radius | 2600 mm |
Booms
| 13. Maximum angle of ascent | 84 degrees | 13. Maximum angle of ascent | 83 degrees |
| 9. Minimum height at maximum lifting angle | 14 m | 9. Minimum height at maximum lifting angle | 11.8 m |
| 10. Max. height at max. lifting angle without boom | 41.8 m | 10. Max. height at max. lifting angle without boom | 18 m |