vs.

      John Deere 759J vs. Tigercat L870C

      3 reasons to buy John Deere 759J:

      Sizes

      Clearance 711 mm and 710 mm 0 % more or 1 mm

      Operation

      Operational weight without attachment 27242.8 kg and 35640 kg 24 % less or 8397.2 kg

      Booms

      Minimum cutting radius 3530 mm and 4800 mm 26 % less or 1270 mm

      7 reasons to buy Tigercat L870C:

      Operation

      Fuel Capacity 970 l. and 583 l. 40 % more or 387 l.
      Hydraulic system fluid volume 190 l. and 136 l. 28 % more or 54 l.
      Generator current strength 110 amperes and 80 amperes 27 % more or 30 amperes

      Motor

      Full power 223.7 kW and 179.7 kW 20 % more or 44.0 kW

      Carrier

      Traction force 33112.2 kg and 26036.2 kg 21 % more or 7076.0 kg
      Rolling bearings number on either side 9 and 8 11 % more or 1

      Booms

      Maximum cutting radius 8460 mm and 8300 mm 2 % more or 160 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1930 mm and 1420 mm
      Overall width 3048 mm and 3330 mm
      Height to cab upper part 3930 mm and 3710 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Model 6081H and QSL9
      Manufacturer John Deere and Cummins

      Carrier

      Caterpillar track pitch 203.2 mm and 215 mm
      Shoe dimensions 609.6 mm and 610 mm

      Booms

      Pin lifting at maximum radius 4720 kg and 6032.8 kg

      Alignment device

      Front end 27 degrees and 20 degrees
      Rear 10 degrees and 7 degrees
      Lateral part 18 degrees and 16 degrees

      Images

      Sizes

      2. Overall width 3048 mm 2. Overall width 3330 mm
      3. Height to cab upper part 3930 mm 3. Height to cab upper part 3710 mm
      5. Clearance 711 mm 5. Clearance 710 mm
      8. Rear platform swing radius 1930 mm 8. Rear platform swing radius 1420 mm

      Carrier

      7. Shoe dimensions 609.6 mm 7. Shoe dimensions 610 mm

      Booms

      9. Minimum cutting radius 3530 mm 9. Minimum cutting radius 4800 mm
      10. Maximum cutting radius 8300 mm 10. Maximum cutting radius 8460 mm