- Home/
- Comparison/
- Felling-and-Bunching Machine/
- John Deere 909J vs. John Deere 759J
John Deere 909J vs. John Deere 759J
11 reasons to buy John Deere 909J:
Sizes
Clearance | 770 mm and 711 mm | 8 % more or 59 mm |
Maximum radius | 8400 mm and 8300 mm | 1 % more or 100 mm |
Operation
Hydraulic system fluid volume | 310.4 l. and 136 l. | 56 % more or 174.4 l. |
Fuel Capacity | 1116.7 l. and 583 l. | 48 % more or 533.7 l. |
Maximum speed | 4 km/h and 3.9 km/h | 2 % more or 0.1 km/h |
Cooling system fluid volume | 41.6 l. and 38.6 l. | 7 % more or 3.0 l. |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Full power | 219.2 kW and 179.7 kW | 18 % more or 39.5 kW |
Carrier
Traction force | 33701.9 kg and 26036.2 kg | 23 % more or 7665.7 kg |
Rolling bearings number on either side | 10 and 8 | 20 % more or 2 |
Booms
Maximum cutting radius | 8360 mm and 8300 mm | 1 % more or 60 mm |
4 reasons to buy John Deere 759J:
Operation
Operational weight without attachment | 27242.8 kg and 34427.7 kg | 21 % less or 7184.9 kg |
Specific ground pressure | 59.3 kPa and 72.3 kPa | 18 % less or 13.0 kPa |
Motor
Effective torque | 1229.7 Nm and 1199.9 Nm | 2 % more or 29.8 Nm |
Booms
Minimum cutting radius | 3530 mm and 5030 mm | 30 % less or 1500 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 3810 mm and 3560 mm |
Overall width | 3330 mm and 3048 mm |
Height to cab upper part | 4000 mm and 3930 mm |
Rear platform swing radius | 3000 mm and 1930 mm |
Operation
Engine oil volume | 28 l. and 28 l. |
Operating voltage | 24 V and 24 V |
Generator current strength | 80 amperes and 80 amperes |
Motor
Cylinders number | 6 and 6 |
Displacement | 8.1 l. and 8.1 l. |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Model | 6081H and 6081H |
Carrier
Track width | 2720 mm and 2430 mm |
Caterpillar track pitch | 216 mm and 203.2 mm |
Shoe dimensions | 609.6 mm and 609.6 mm |
Booms
Pin lifting at maximum radius | 6432 kg and 4720 kg |
Alignment device
Front end | 7 degrees and 27 degrees |
Rear | 26 degrees and 10 degrees |
Lateral part | 14 degrees and 18 degrees |
Images
Sizes
2. Overall width | 3330 mm | 2. Overall width | 3048 mm |
3. Height to cab upper part | 4000 mm | 3. Height to cab upper part | 3930 mm |
4. Caterpillar track length on ground level | 3810 mm | 4. Caterpillar track length on ground level | 3560 mm |
5. Clearance | 770 mm | 5. Clearance | 711 mm |
8. Rear platform swing radius | 3000 mm | 8. Rear platform swing radius | 1930 mm |
Carrier
6. Track width | 2720 mm | 6. Track width | 2430 mm |
7. Shoe dimensions | 609.6 mm | 7. Shoe dimensions | 609.6 mm |
Booms
10. Maximum cutting radius | 8360 mm | 10. Maximum cutting radius | 8300 mm |
9. Minimum cutting radius | 5030 mm | 9. Minimum cutting radius | 3530 mm |