vs.

      John Deere 959J vs. John Deere 759J

      10 reasons to buy John Deere 959J:

      Sizes

      Clearance 770 mm and 711 mm 8 % more or 59 mm
      Maximum radius 8400 mm and 8300 mm 1 % more or 100 mm

      Operation

      Cooling system fluid volume 42 l. and 38.6 l. 8 % more or 3.4 l.
      Hydraulic system fluid volume 311 l. and 136 l. 56 % more or 175 l.
      Fuel Capacity 1117 l. and 583 l. 48 % more or 534 l.

      Motor

      Full power 219 kW and 179.7 kW 18 % more or 39.3 kW
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Carrier

      Traction force 39145 kg and 26036.2 kg 33 % more or 13108.8 kg
      Rolling bearings number on either side 10 and 8 20 % more or 2

      Booms

      Maximum cutting radius 8530 mm and 8300 mm 3 % more or 230 mm

      5 reasons to buy John Deere 759J:

      Operation

      Maximum speed 3.9 km/h and 3.6 km/h 8 % more or 0.3 km/h
      Specific ground pressure 59.3 kPa and 75.8 kPa 22 % less or 16.5 kPa
      Operational weight without attachment 27242.8 kg and 36015.2 kg 24 % less or 8772.4 kg

      Motor

      Effective torque 1229.7 Nm and 1200 Nm 2 % more or 29.7 Nm

      Booms

      Minimum cutting radius 3530 mm and 5180 mm 32 % less or 1650 mm

      Neutral reasons:

      Sizes

      Caterpillar track length on ground level 3810 mm and 3560 mm
      Overall width 3330 mm and 3048 mm
      Height to cab upper part 4000 mm and 3930 mm
      Rear platform swing radius 3200 mm and 1930 mm

      Operation

      Engine oil volume 28 l. and 28 l.
      Operating voltage 24 V and 24 V
      Generator current strength 80 amperes and 80 amperes

      Motor

      Manufacturer John Deere and John Deere
      Model 6081H and 6081H
      Cylinders number 6 and 6
      Displacement 8.1 l. and 8.1 l.
      Aspiration turbocharging and turbocharging

      Carrier

      Caterpillar track pitch 216 mm and 203.2 mm
      Shoe dimensions 610 mm and 609.6 mm
      Track width 2720 mm and 2430 mm

      Alignment device

      Lateral part 14 degrees and 18 degrees
      Front end 7 degrees and 27 degrees
      Rear 26 degrees and 10 degrees

      Images

      Sizes

      2. Overall width 3330 mm 2. Overall width 3048 mm
      3. Height to cab upper part 4000 mm 3. Height to cab upper part 3930 mm
      4. Caterpillar track length on ground level 3810 mm 4. Caterpillar track length on ground level 3560 mm
      5. Clearance 770 mm 5. Clearance 711 mm
      8. Rear platform swing radius 3200 mm 8. Rear platform swing radius 1930 mm

      Carrier

      6. Track width 2720 mm 6. Track width 2430 mm
      7. Shoe dimensions 610 mm 7. Shoe dimensions 609.6 mm

      Booms

      9. Minimum cutting radius 5180 mm 9. Minimum cutting radius 3530 mm
      10. Maximum cutting radius 8530 mm 10. Maximum cutting radius 8300 mm