vs.

      Tigercat L870C vs. John Deere 909J

      4 reasons to buy Tigercat L870C:

      Operation

      Generator current strength 110 amperes and 80 amperes 27 % more or 30 amperes

      Motor

      Full power 223.7 kW and 219.2 kW 2 % more or 4.5 kW

      Booms

      Maximum cutting radius 8460 mm and 8360 mm 1 % more or 100 mm
      Minimum cutting radius 4800 mm and 5030 mm 5 % less or 230 mm

      7 reasons to buy John Deere 909J:

      Sizes

      Clearance 770 mm and 710 mm 8 % more or 60 mm

      Operation

      Operational weight without attachment 34427.7 kg and 35640 kg 3 % less or 1212.3 kg
      Fuel Capacity 1116.7 l. and 970 l. 13 % more or 146.7 l.
      Hydraulic system fluid volume 310.4 l. and 190 l. 39 % more or 120.4 l.

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev

      Carrier

      Traction force 33701.9 kg and 33112.2 kg 2 % more or 589.7 kg
      Rolling bearings number on either side 10 and 9 10 % more or 1

      Neutral reasons:

      Sizes

      Overall width 3330 mm and 3330 mm
      Height to cab upper part 3710 mm and 4000 mm
      Rear platform swing radius 1420 mm and 3000 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and John Deere
      Model QSL9 and 6081H

      Carrier

      Shoe dimensions 610 mm and 609.6 mm
      Caterpillar track pitch 215 mm and 216 mm

      Booms

      Pin lifting at maximum radius 6032.8 kg and 6432 kg

      Alignment device

      Front end 20 degrees and 7 degrees
      Rear 7 degrees and 26 degrees
      Lateral part 16 degrees and 14 degrees

      Images

      Sizes

      2. Overall width 3330 mm 2. Overall width 3330 mm
      3. Height to cab upper part 3710 mm 3. Height to cab upper part 4000 mm
      5. Clearance 710 mm 5. Clearance 770 mm
      8. Rear platform swing radius 1420 mm 8. Rear platform swing radius 3000 mm

      Carrier

      7. Shoe dimensions 610 mm 7. Shoe dimensions 609.6 mm

      Booms

      10. Maximum cutting radius 8460 mm 10. Maximum cutting radius 8360 mm
      9. Minimum cutting radius 4800 mm 9. Minimum cutting radius 5030 mm