vs.

      Tigercat L870C vs. Tigercat L845C

      4 reasons to buy Tigercat L870C:

      Sizes

      Clearance 710 mm and 685 mm 4 % more or 25 mm

      Motor

      Full power 223.7 kW and 205.1 kW 8 % more or 18.6 kW

      Carrier

      Traction force 33112.2 kg and 29937.1 kg 10 % more or 3175.1 kg

      Booms

      Maximum cutting radius 8460 mm and 8050 mm 5 % more or 410 mm

      4 reasons to buy Tigercat L845C:

      Operation

      Generator current strength 140 amperes and 110 amperes 21 % more or 30 amperes
      Operational weight without attachment 32480 kg and 35640 kg 9 % less or 3160 kg

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Booms

      Minimum cutting radius 4165 mm and 4800 mm 13 % less or 635 mm

      Neutral reasons:

      Sizes

      Dimensional length 5280 mm and 4940 mm
      Overall width 3330 mm and 3435 mm
      Height to cab upper part 3710 mm and 3690 mm
      Rear platform swing radius 1420 mm and 1020 mm

      Operation

      Operating voltage 24 V and 24 V
      Fuel Capacity 970 l. and 970 l.
      Hydraulic system fluid volume 190 l. and 190 l.

      Motor

      Manufacturer Cummins and Mercedes-Benz
      Model QSL9 and 906

      Carrier

      Caterpillar track pitch 215 mm and 203.2 mm
      Shoe dimensions 610 mm and 710 mm
      Rolling bearings number on either side 9 and 9

      Booms

      Pin lifting at maximum radius 6032.8 kg and 5170 kg

      Images

      Sizes

      8. Rear platform swing radius 1420 mm 8. Rear platform swing radius 1020 mm
      1. Dimensional length 5280 mm 1. Dimensional length 4940 mm
      2. Overall width 3330 mm 2. Overall width 3435 mm
      3. Height to cab upper part 3710 mm 3. Height to cab upper part 3690 mm
      5. Clearance 710 mm 5. Clearance 685 mm

      Carrier

      7. Shoe dimensions 610 mm 7. Shoe dimensions 710 mm

      Booms

      9. Minimum cutting radius 4800 mm 9. Minimum cutting radius 4165 mm
      10. Maximum cutting radius 8460 mm 10. Maximum cutting radius 8050 mm