vs.

      John Deere 1710D vs. Komatsu 830.3

      11 reasons to buy John Deere 1710D:

      Sizes

      Clearance 730 mm and 622 mm 15 % more or 108 mm

      Operation

      Hydraulic system fluid volume 189.3 l. and 80 l. 58 % more or 109.3 l.
      Generator current strength 140 amperes and 110 amperes 21 % more or 30 amperes
      Fuel Capacity 181.7 l. and 100 l. 45 % more or 81.7 l.

      Motor

      Power 160.3 kW and 99.9 kW 38 % more or 60.4 kW
      Torque 1099.6 Nm and 596.6 Nm 46 % more or 503.0 Nm
      Displacement 8.1 l. and 4.4 l. 46 % more or 3.7 l.
      Cylinders number 6 and 4 33 % more or 2

      Cranes

      Full rotary motion torque 41000 Nm and 21896.5 Nm 47 % more or 19103.5 Nm
      Maximum radius 8500 mm and 6850 mm 19 % more or 1650 mm
      Torque under full lifting force 151000 Nm and 74027.7 Nm 51 % more or 76972.3 Nm

      4 reasons to buy Komatsu 830.3:

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Bandwidth 170 l/min and 210.1 l/min 19 % less or 40.1 l/min

      Gear box

      Maximum speed 25 km/h and 23 km/h 8 % more or 2 km/h

      Neutral reasons:

      Under logs pad

      Loading zone 5.4 m2 and 4.1 m2

      Sizes

      Length 10850 mm and 8122 mm
      Between tyres width 3190 mm and 2650 mm
      Height to crane upper part 3900 mm and 3526 mm
      Wheelbase 5900 mm and 4150 mm
      Under logs pad length 5560 mm and 2300 mm

      Operation

      Operating voltage 24 V and 24 V
      Front/rear tyre size 8wd 750x26.5/750x26.5 and 600/50x22.5

      Motor

      Model 6081H and 44 CWA 3 level
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump variable displacement piston pump and load sensing single loop with variable load piston pump
      Overflow valve pressure 23993.7 kPa and 23511.1 kPa

      Gear box

      Transmission type hydrostatic mechanical shifting and hydrostatic

      Cranes

      Type of crane Timberjack CF 8 85 and CRF 5

      Images

      Sizes

      1. Length 10850 mm 1. Length 8122 mm
      2. Between tyres width 3190 mm 2. Between tyres width 2650 mm
      3. Height to crane upper part 3900 mm 3. Height to crane upper part 3526 mm
      4. Wheelbase 5900 mm 4. Wheelbase 4150 mm
      5. Clearance 730 mm 5. Clearance 622 mm
      6. Under logs pad length 5560 mm 6. Under logs pad length 2300 mm