vs.

      John Deere 810D vs. Ponsse Elephant

      1 reasons to buy John Deere 810D:

      Cranes

      Maximum radius 9800 mm and 9500 mm 3 % more or 300 mm

      7 reasons to buy Ponsse Elephant:

      Sizes

      Clearance 750 mm and 595 mm 21 % more or 155 mm

      Operation

      Hydraulic system fluid volume 200 l. and 78 l. 61 % more or 122 l.
      Fuel Capacity 250 l. and 110 l. 56 % more or 140 l.

      Motor

      Power 205 kW and 85.8 kW 58 % more or 119.2 kW
      Torque 1100 Nm and 497.6 Nm 55 % more or 602.4 Nm
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Cranes

      Torque under full lifting force 145000 Nm and 76000 Nm 48 % more or 69000 Nm

      Neutral reasons:

      Under logs pad

      Loading zone 3.4 m2 and 6.3 m2

      Sizes

      Length 8030 mm and 11225 mm
      Between tyres width 2530 mm and 3130 mm
      Height to crane upper part 3780 mm and 3900 mm

      Operation

      Front/rear tyre size 8wd 600x22.5/600x22.5 and 750/55-26.5 / 750/55-26.5

      Motor

      Manufacturer John Deere and Mercedes-Benz
      Model 4045HTJ and OM906LA

      Hydraulic system

      Type of pump load sensing and load-sensing system
      Overflow valve pressure 24000 kPa and 23497.3 kPa

      Cranes

      Type of crane John Deere CFI and Ponsse K100

      Images

      Sizes

      1. Length 8030 mm 1. Length 11225 mm
      2. Between tyres width 2530 mm 2. Between tyres width 3130 mm
      3. Height to crane upper part 3780 mm 3. Height to crane upper part 3900 mm
      5. Clearance 595 mm 5. Clearance 750 mm