- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- John Deere 648G vs. John Deere 548G serie III
John Deere 648G vs. John Deere 548G serie III
8 reasons to buy John Deere 648G:
Sizes
Maximum traction force on a rope with empty drum | 186.2 kN and 155.8 kN | 16 % more or 30.4 kN |
Maximum blade height | 1310 mm and 1209 mm | 8 % more or 101 mm |
Maximum line speed | 44.5 m/min and 37.2 m/min | 16 % more or 7.3 m/min |
Clearance | 514 mm and 510 mm | 1 % more or 4 mm |
Maximum boom height | 3680 mm and 2991 mm | 19 % more or 689 mm |
Operation
Fuel Capacity | 265 l. and 189.3 l. | 29 % more or 75.7 l. |
Motor
Full power | 117.1 kW and 96.2 kW | 18 % more or 20.9 kW |
Gear box
Maximum forward speed | 25.3 km/h and 19.8 km/h | 22 % more or 5.5 km/h |
8 reasons to buy John Deere 548G serie III:
Sizes
Grapple height from ground level | 864 mm and 1376 mm | 37 % less or 512 mm |
Grapple radius on ground level | 1970 mm and 1536 mm | 22 % more or 434 mm |
Operation
Hydraulic system fluid volume | 46 l. and 41.6 l. | 10 % more or 4.4 l. |
Generator current strength | 120 amperes and 95 amperes | 21 % more or 25 amperes |
Steering angle | 45 degrees and 90 degrees | 50 % less or 45 degrees |
Hydraulic system
Pump flow rate | 110 l/min and 143.8 l/min | 24 % less or 33.8 l/min |
Gear box
Maximum reverse gear | 15 km/h and 9 km/h | 40 % more or 6 km/h |
Reverse gears number | 7 and 4 | 43 % more or 3 |
Neutral reasons:
Sizes
Overall width | 3110 mm and 2896 mm |
Roller diameter | 203.2 mm and 203.2 mm |
Height to cab upper part | 3030 mm and 3009.9 mm |
Tong opening at tips | 2921 mm and 2160 mm |
Wheelbase | 3430 mm and 2920 mm |
Dimensional length | 7345 mm and 6330 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 12083.2 kg and 10745.6 kg |
Axle oscillating | 30 degrees and 30 degrees |
Tyre size | 28L-26 and 28L-26 |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Displacement | 6.8 l. and 6.8 l. |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Model | 6068T and 6068H |
Hydraulic system
Overflow valve pressure | 20684.3 kPa and 21373.7 kPa |
Type of pump | Piston and variable displacement axial piston pump |
Gear box
Transmission type | planetary gear and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Images
Sizes
5. Clearance | 514 mm | 5. Clearance | 510 mm |
6. Maximum boom height | 3680 mm | 6. Maximum boom height | 2991 mm |
7. Grapple height from ground level | 1376 mm | 7. Grapple height from ground level | 864 mm |
8. Grapple radius on ground level | 1536 mm | 8. Grapple radius on ground level | 1970 mm |
9. Tong opening at tips | 2921 mm | 9. Tong opening at tips | 2160 mm |
1. Dimensional length | 7230 mm | 1. Dimensional length | 6330 mm |
2. Overall width | 3110 mm | 2. Overall width | 2896 mm |
3. Height to cab upper part | 3030 mm | 3. Height to cab upper part | 3009.9 mm |
4. Wheelbase | 3430 mm | 4. Wheelbase | 2920 mm |