vs.

      John Deere 748G serie II vs. John Deere 848H

      10 reasons to buy John Deere 748G serie II:

      Sizes

      Grapple height from ground level 863 mm and 1490 mm 42 % less or 627 mm
      Drum capacity at cable width 114 m and 54.6 m 52 % more or 59.4 m
      Maximum blade height 1500 mm and 1499 mm 0 % more or 1 mm
      Maximum traction force on a rope with empty drum 208.4 kN and 193 kN 7 % more or 15.4 kN

      Operation

      Generator current strength 135 amperes and 120 amperes 11 % more or 15 amperes

      Motor

      Displacement 8.1 l. and 6.8 l. 16 % more or 1.3 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 7 and 3 57 % more or 4
      Maximum forward speed 22.8 km/h and 20.9 km/h 8 % more or 1.9 km/h
      Maximum reverse gear 17.1 km/h and 15.3 km/h 11 % more or 1.8 km/h

      9 reasons to buy John Deere 848H:

      Sizes

      Maximum boom height 4289 mm and 3781 mm 12 % more or 508 mm
      Grapple load capacity - tongs tip to tip 1.5 m2 and 1.1 m2 27 % more or 0.4 m2
      Grapple radius on ground level 3111 mm and 2222 mm 29 % more or 889 mm
      Cable width 19.1 mm and 15.8 mm 17 % more or 3.3 mm
      Clearance 615 mm and 599 mm 3 % more or 16 mm

      Operation

      Fuel Capacity 329.3 l. and 273 l. 17 % more or 56.3 l.
      Hydraulic system fluid volume 56.8 l. and 41.6 l. 27 % more or 15.2 l.
      Steering angle 45 degrees and 90 degrees 50 % less or 45 degrees

      Motor

      Full power 149 kW and 132 kW 11 % more or 17 kW

      Neutral reasons:

      Sizes

      Tong opening at tips 3124 mm and 3302 mm
      Dimensional length 7821 mm and 8072 mm
      Roller diameter 279.4 mm and 203.2 mm
      Overall width 3230 mm and 3560 mm
      Height to cab upper part 3130 mm and 3127 mm
      Wheelbase 3680 mm and 3785 mm

      Operation

      Working weight 14719 kg and 17826.2 kg
      Operating voltage 12 V and 12 V
      Axle oscillating 30 degrees and 30 degrees
      Tyre size 30.5-32 and 30.5-32

      Motor

      Manufacturer John Deere and John Deere
      Cylinders number 6 and 6
      Model 6081T and 6068H
      Aspiration turbocharging and turbocharging
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump variable displacement axial piston pump and variable displacement axial piston pump
      Pump flow rate 159 l/min and 159 l/min
      Overflow valve pressure 20684 kPa and 148.4 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift

      Images

      Sizes

      1. Dimensional length 7763 mm 1. Dimensional length 8072 mm
      2. Overall width 3230 mm 2. Overall width 3560 mm
      3. Height to cab upper part 3130 mm 3. Height to cab upper part 3127 mm
      4. Wheelbase 3680 mm 4. Wheelbase 3785 mm
      5. Clearance 599 mm 5. Clearance 615 mm
      6. Maximum boom height 3781 mm 6. Maximum boom height 4289 mm
      7. Grapple height from ground level 1331 mm 7. Grapple height from ground level 1490 mm
      8. Grapple radius on ground level 1547 mm 8. Grapple radius on ground level 3111 mm
      9. Tong opening at tips 3124 mm 9. Tong opening at tips 3302 mm