vs.

      John Deere 748G serie II vs. Tigercat E625C

      5 reasons to buy John Deere 748G serie II:

      Operation

      Generator current strength 135 amperes and 80 amperes 41 % more or 55 amperes

      Gear box

      Maximum forward speed 22.8 km/h and 13.5 km/h 41 % more or 9.3 km/h
      Maximum reverse gear 17.1 km/h and 13.5 km/h 21 % more or 3.6 km/h
      Forward gears number 8 and 1 87 % more or 7
      Reverse gears number 7 and 1 86 % more or 6

      5 reasons to buy Tigercat E625C:

      Sizes

      Clearance 635 mm and 599 mm 6 % more or 36 mm
      Grapple load capacity - tongs tip to tip 2 m2 and 1.1 m2 45 % more or 0.9 m2

      Operation

      Hydraulic system fluid volume 105 l. and 41.6 l. 60 % more or 63.4 l.
      Fuel Capacity 350 l. and 273 l. 22 % more or 77 l.

      Motor

      Full power 164.1 kW and 132 kW 20 % more or 32.1 kW

      Neutral reasons:

      Sizes

      Overall width 3230 mm and 3330 mm
      Height to cab upper part 3130 mm and 3150 mm
      Wheelbase 3680 mm and 4900 mm
      Dimensional length 7821 mm and 9145 mm
      Tong opening at tips 3124 mm and 3810 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 14719 kg and 21090 kg
      Axle oscillating 30 degrees and 15 degrees
      Tyre size 30.5-32 and Front 30.5 x 32, Rear 28L x 26

      Motor

      Manufacturer John Deere and Cummins
      Model 6081T and QSB6.7
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump variable displacement axial piston pump and axial piston pumps with variable displacement

      Gear box

      Transmission type Powershift transmission with direct drive and single-speed mechanical, hydrostatic with variable speed

      Images

      Sizes

      1. Dimensional length 7763 mm 1. Dimensional length 9145 mm
      2. Overall width 3230 mm 2. Overall width 3330 mm
      3. Height to cab upper part 3130 mm 3. Height to cab upper part 3150 mm
      4. Wheelbase 3680 mm 4. Wheelbase 4900 mm
      5. Clearance 599 mm 5. Clearance 635 mm
      9. Tong opening at tips 3124 mm 9. Tong opening at tips 3810 mm