- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- John Deere 748G serie III vs. Tigercat 630C
John Deere 748G serie III vs. Tigercat 630C
4 reasons to buy John Deere 748G serie III:
Sizes
Blade width | 2964 mm and 2160 mm | 27 % more or 804 mm |
Operation
Fuel Capacity | 313 l. and 305 l. | 3 % more or 8 l. |
Generator current strength | 120 amperes and 80 amperes | 33 % more or 40 amperes |
Gear box
Maximum forward speed | 24.5 km/h and 17.7 km/h | 28 % more or 6.8 km/h |
5 reasons to buy Tigercat 630C:
Sizes
Clearance | 635 mm and 599 mm | 6 % more or 36 mm |
Grapple load capacity - tongs tip to tip | 1.8 m2 and 1.2 m2 | 33 % more or 0.6 m2 |
Operation
Hydraulic system fluid volume | 105 l. and 41.6 l. | 60 % more or 63.4 l. |
Motor
Full power | 186.4 kW and 132 kW | 29 % more or 54.4 kW |
Gear box
Maximum reverse gear | 17.7 km/h and 16.4 km/h | 7 % more or 1.3 km/h |
Neutral reasons:
Sizes
Overall width | 3230 mm and 3225 mm |
Height to cab upper part | 3130 mm and 3150 mm |
Wheelbase | 3680 mm and 4040 mm |
Dimensional length | 7763 mm and 7140 mm |
Tong opening at tips | 3175 mm and 3685 mm |
Operation
Working weight | 15595 kg and 17010 kg |
Operating voltage | 12 V and 24 V |
Axle oscillating | 30 degrees and 15 degrees |
Tyre size | 30.5x32 and 30.5L x 32 16PR |
Motor
Manufacturer | John Deere and Cummins |
Model | 6081H and QSC8.3 |
Hydraulic system
Type of pump | variable displacement axial piston pump and axial piston pumps with variable displacement |
Gear box
Transmission type | Powershift transmission with direct drive and single-speed mechanical, hydrostatic with variable speed |
Images
Sizes
1. Dimensional length | 7763 mm | 1. Dimensional length | 7140 mm |
2. Overall width | 3230 mm | 2. Overall width | 3225 mm |
3. Height to cab upper part | 3130 mm | 3. Height to cab upper part | 3150 mm |
4. Wheelbase | 3680 mm | 4. Wheelbase | 4040 mm |
5. Clearance | 599 mm | 5. Clearance | 635 mm |
9. Tong opening at tips | 3175 mm | 9. Tong opening at tips | 3685 mm |