vs.

      Ranger H66DSG-II vs. John Deere 748G serie III

      5 reasons to buy Ranger H66DSG-II:

      Sizes

      Maximum line speed 82 m/min and 43.2 m/min 47 % more or 38.8 m/min
      Grapple load capacity - tongs tip to tip 1.3 m2 and 1.2 m2 8 % more or 0.1 m2

      Operation

      Cooling system fluid volume 38 l. and 28.4 l. 25 % more or 9.6 l.
      Hydraulic system fluid volume 53 l. and 41.6 l. 22 % more or 11.4 l.

      Hydraulic system

      Pump flow rate 139 l/min and 159 l/min 13 % less or 20 l/min

      9 reasons to buy John Deere 748G serie III:

      Sizes

      Maximum traction force on a rope with empty drum 224 kN and 194.6 kN 13 % more or 29.4 kN

      Operation

      Fuel Capacity 313 l. and 280 l. 11 % more or 33 l.
      Engine oil volume 23.7 l. and 14 l. 41 % more or 9.7 l.
      Generator current strength 120 amperes and 70 amperes 42 % more or 50 amperes

      Motor

      Full power 132 kW and 130 kW 2 % more or 2 kW
      Peak torque 808 Nm and 605 Nm 25 % more or 203 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.

      Gear box

      Forward gears number 8 and 3 62 % more or 5
      Maximum forward speed 24.5 km/h and 21.9 km/h 11 % more or 2.6 km/h

      Neutral reasons:

      Sizes

      Overall width 2977 mm and 3230 mm
      Height to cab upper part 3302 mm and 3130 mm
      Tong opening at tips 3070 mm and 3175 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 11581 kg and 15595 kg
      Tyre size 28Lx26 and 30.5x32

      Motor

      Manufacturer BT and John Deere
      Model Cummins 6A 5.9 and 6081H
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump gear type pump and variable displacement axial piston pump
      Overflow valve pressure 19000 kPa and 20684 kPa

      Gear box

      Transmission type Clark 32000 and Powershift transmission with direct drive

      Images

      Sizes

      2. Overall width 2977 mm 2. Overall width 3230 mm
      3. Height to cab upper part 3302 mm 3. Height to cab upper part 3130 mm
      9. Tong opening at tips 3070 mm 9. Tong opening at tips 3175 mm