- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- Tigercat E625C vs. John Deere 748G serie III
Tigercat E625C vs. John Deere 748G serie III
5 reasons to buy Tigercat E625C:
Sizes
Grapple load capacity - tongs tip to tip | 2 m2 and 1.2 m2 | 40 % more or 0.8 m2 |
Clearance | 635 mm and 599 mm | 6 % more or 36 mm |
Operation
Fuel Capacity | 350 l. and 313 l. | 11 % more or 37 l. |
Hydraulic system fluid volume | 105 l. and 41.6 l. | 60 % more or 63.4 l. |
Motor
Full power | 164.1 kW and 132 kW | 20 % more or 32.1 kW |
6 reasons to buy John Deere 748G serie III:
Sizes
Blade width | 2964 mm and 2285 mm | 23 % more or 679 mm |
Operation
Generator current strength | 120 amperes and 80 amperes | 33 % more or 40 amperes |
Gear box
Reverse gears number | 7 and 1 | 86 % more or 6 |
Maximum forward speed | 24.5 km/h and 13.5 km/h | 45 % more or 11.0 km/h |
Maximum reverse gear | 16.4 km/h and 13.5 km/h | 18 % more or 2.9 km/h |
Forward gears number | 8 and 1 | 87 % more or 7 |
Neutral reasons:
Sizes
Tong opening at tips | 3810 mm and 3175 mm |
Height to cab upper part | 3150 mm and 3130 mm |
Wheelbase | 4900 mm and 3680 mm |
Dimensional length | 9145 mm and 7763 mm |
Overall width | 3330 mm and 3230 mm |
Operation
Working weight | 21090 kg and 15595 kg |
Operating voltage | 24 V and 12 V |
Axle oscillating | 15 degrees and 30 degrees |
Tyre size | Front 30.5 x 32, Rear 28L x 26 and 30.5x32 |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Manufacturer | Cummins and John Deere |
Model | QSB6.7 and 6081H |
Hydraulic system
Type of pump | axial piston pumps with variable displacement and variable displacement axial piston pump |
Gear box
Transmission type | single-speed mechanical, hydrostatic with variable speed and Powershift transmission with direct drive |
Images
Sizes
1. Dimensional length | 9145 mm | 1. Dimensional length | 7763 mm |
2. Overall width | 3330 mm | 2. Overall width | 3230 mm |
3. Height to cab upper part | 3150 mm | 3. Height to cab upper part | 3130 mm |
4. Wheelbase | 4900 mm | 4. Wheelbase | 3680 mm |
5. Clearance | 635 mm | 5. Clearance | 599 mm |
9. Tong opening at tips | 3810 mm | 9. Tong opening at tips | 3175 mm |