vs.

      Caterpillar D10R vs. Komatsu D475A-5 Level 2

      2 reasons to buy Caterpillar D10R:

      Gear box

      Maximum forward speed 12.4 km/h and 11.2 km/h 10 % more or 1.2 km/h
      Maximum reverse gear 15.6 km/h and 14 km/h 10 % more or 1.6 km/h

      12 reasons to buy Komatsu D475A-5 Level 2:

      Standard blade

      Cut depth 860 mm and 674 mm 22 % more or 186 mm

      Sizes

      Clearance 655 mm and 615 mm 6 % more or 40 mm

      Operation

      Fuel Capacity 1670 l. and 1109 l. 34 % more or 561 l.
      Cooling system fluid volume 210 l. and 132 l. 37 % more or 78 l.
      Engine oil volume 121 l. and 60 l. 50 % more or 61 l.
      Hydraulic system fluid volume 180 l. and 108 l. 40 % more or 72 l.
      Final drive fluid volume 75 l. and 23 l. 69 % more or 52 l.

      Motor

      Full power 671 kW and 457.1 kW 32 % more or 213.9 kW
      Effective power 664 kW and 425 kW 36 % more or 239 kW
      Displacement 30.5 l. and 27 l. 11 % more or 3.5 l.

      Carrier

      Specific ground pressure 112 kPa and 135.3 kPa 17 % less or 23.3 kPa
      Contact with ground area 7.3 m2 and 4.7 m2 36 % more or 2.6 m2

      Neutral reasons:

      Standard blade

      Width 5263 mm and 6465 mm
      Height 2119 mm and 2690 mm

      Sizes

      Length with blade 7754 mm and 10525 mm
      Width between caterpillar tracks 3160 mm and 2770 mm
      Height to cab upper part 4100 mm and 4646 mm

      Operation

      Working weight 65403.5 kg and 113200 kg

      Motor

      Manufacturer Caterpillar and Komatsu
      Model 3412E and SAA12V140E-3
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Cylinders number 12 and 12

      Hydraulic system

      Overflow valve pressure 18615.8 kPa and 27441.1 kPa

      Gear box

      Transmission type powershift and Komatsu TORQFLOW transmission
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 610 mm and 810 mm
      Rolling bearings number on either side 8 and 8

      Images

      Sizes

      1. Length with blade 7754 mm 1. Length with blade 10525 mm
      2. Width between caterpillar tracks 3160 mm 2. Width between caterpillar tracks 2770 mm
      3. Height to cab upper part 4100 mm 3. Height to cab upper part 4646 mm
      5. Clearance 615 mm 5. Clearance 655 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 810 mm