- Home/
- Comparison/
- Tracked Tractor/
- Caterpillar D10T vs. Caterpillar D10R
Caterpillar D10T vs. Caterpillar D10R
9 reasons to buy Caterpillar D10T:
Operation
Generator current strength | 95 amperes and 75 amperes | 21 % more or 20 amperes |
Fuel Capacity | 1204 l. and 1109 l. | 8 % more or 95 l. |
Engine oil volume | 68 l. and 60 l. | 12 % more or 8 l. |
Hydraulic system fluid volume | 144 l. and 108 l. | 25 % more or 36 l. |
Power unit fluid volume | 193 l. and 189 l. | 2 % more or 4 l. |
Motor
Full power | 482 kW and 457.1 kW | 5 % more or 24.9 kW |
Effective power | 433 kW and 425 kW | 2 % more or 8 kW |
Gear box
Maximum forward speed | 12.7 km/h and 12.4 km/h | 2 % more or 0.3 km/h |
Maximum reverse gear | 15.8 km/h and 15.6 km/h | 1 % more or 0.2 km/h |
3 reasons to buy Caterpillar D10R:
Standard blade
Volume | 22 m3 and 18.5 m3 | 16 % more or 3.5 m3 |
Motor
Power measured at | 1900 rev / min and 1800 rev / min | 5 % more or 100 rev |
Hydraulic system
Pump bandwidth | 408.8 l/min and 404 l/min | 1 % more or 4.8 l/min |
Neutral reasons:
Standard blade
Cut depth | 674 mm and 674 mm |
Width | 4860 mm and 5263 mm |
Height | 2120 mm and 2119 mm |
Sizes
Length without blade | 5331 mm and 5331 mm |
Length with blade | 9260 mm and 7754 mm |
Width between caterpillar tracks | 3160 mm and 3160 mm |
Height to cab upper part | 4078 mm and 4100 mm |
Caterpillar track length on ground level | 3855 mm and 3880 mm |
Clearance | 615 mm and 615 mm |
Operation
Working weight | 66451 kg and 65403.5 kg |
Cooling system fluid volume | 132 l. and 132 l. |
Final drive fluid volume | 23 l. and 23 l. |
Operating voltage | 24 V and 24 V |
Motor
Model | C27 ACERT and 3412E |
Displacement | 27 l. and 27 l. |
Cylinders number | 12 and 12 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Caterpillar and Caterpillar |
Hydraulic system
Overflow valve pressure | 18790 kPa and 18615.8 kPa |
Gear box
Transmission type | powershift transmission and powershift |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Carrier
Standard shoe size | 610 mm and 610 mm |
Rolling bearings number on either side | 8 and 8 |
Contact with ground area | 4.7 m2 and 4.7 m2 |
Images
Sizes
1. Length with blade | 9260 mm | 1. Length with blade | 7754 mm |
2. Width between caterpillar tracks | 3160 mm | 2. Width between caterpillar tracks | 3160 mm |
3. Height to cab upper part | 4078 mm | 3. Height to cab upper part | 4100 mm |
4. Caterpillar track length on ground level | 3855 mm | 4. Caterpillar track length on ground level | 3880 mm |
5. Clearance | 615 mm | 5. Clearance | 615 mm |
6. Length without blade | 5331 mm | 6. Length without blade | 5331 mm |
Carrier
8. Standard shoe size | 610 mm | 8. Standard shoe size | 610 mm |