vs.

      Caterpillar D10T vs. Komatsu D375A-5

      10 reasons to buy Caterpillar D10T:

      Sizes

      Clearance 615 mm and 610 mm 1 % more or 5 mm

      Operation

      Fuel Capacity 1204 l. and 1050 l. 13 % more or 154 l.
      Cooling system fluid volume 132 l. and 120 l. 9 % more or 12 l.
      Hydraulic system fluid volume 144 l. and 138 l. 4 % more or 6 l.

      Motor

      Displacement 27 l. and 23.1 l. 14 % more or 3.9 l.
      Cylinders number 12 and 6 50 % more or 6
      Full power 482 kW and 451 kW 6 % more or 31 kW
      Effective power 433 kW and 391 kW 10 % more or 42 kW

      Gear box

      Maximum forward speed 12.7 km/h and 11.8 km/h 7 % more or 0.9 km/h

      Carrier

      Track shoes number per side 44 and 41 7 % more or 3

      4 reasons to buy Komatsu D375A-5:

      Operation

      Engine oil volume 86 l. and 68 l. 21 % more or 18 l.
      Final drive fluid volume 65 l. and 23 l. 65 % more or 42 l.

      Hydraulic system

      Pump bandwidth 405 l/min and 404 l/min 0 % more or 1 l/min

      Carrier

      Contact with ground area 4.9 m2 and 4.7 m2 4 % more or 0.2 m2

      Neutral reasons:

      Standard blade

      Width 4860 mm and 4695 mm
      Height 2120 mm and 2265 mm

      Sizes

      Length with blade 9260 mm and 10410 mm
      Width between caterpillar tracks 3160 mm and 2500 mm
      Height to cab upper part 4078 mm and 4285 mm

      Operation

      Working weight 66451 kg and 69560 kg

      Motor

      Manufacturer Caterpillar and Komatsu
      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow, Exhaust gas recirculation system with cooling
      Model C27 ACERT and SA6D170E-3
      Power measured at 1800 rev / min and 1800 rev / min

      Hydraulic system

      Overflow valve pressure 18790 kPa and 20615.3 kPa

      Gear box

      Transmission type powershift transmission and Komatsu TORQFLOW transmission
      Forward gears number 3 and 3
      Reverse gears number 3 and 3
      Maximum reverse gear 15.8 km/h and 15.8 km/h

      Carrier

      Standard shoe size 610 mm and 610 mm
      Rolling bearings number on either side 8 and 8

      Images

      Sizes

      1. Length with blade 9260 mm 1. Length with blade 10410 mm
      2. Width between caterpillar tracks 3160 mm 2. Width between caterpillar tracks 2500 mm
      3. Height to cab upper part 4078 mm 3. Height to cab upper part 4285 mm
      5. Clearance 615 mm 5. Clearance 610 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 610 mm