vs.

      Caterpillar D11T vs. Caterpillar D9R

      12 reasons to buy Caterpillar D11T:

      Standard blade

      Volume 27.2 m3 and 16.4 m3 40 % more or 10.8 m3
      Cut depth 766 mm and 606 mm 21 % more or 160 mm

      Sizes

      Clearance 674.5 mm and 591 mm 12 % more or 83.5 mm

      Operation

      Fuel Capacity 1609 l. and 817.6 l. 49 % more or 791.4 l.
      Engine oil volume 106 l. and 45.4 l. 57 % more or 60.6 l.
      Hydraulic system fluid volume 243 l. and 71.9 l. 70 % more or 171.1 l.
      Power unit fluid volume 344 l. and 166.6 l. 52 % more or 177.4 l.
      Final drive fluid volume 30 l. and 18.9 l. 37 % more or 11.1 l.

      Motor

      Full power 698 kW and 305.7 kW 56 % more or 392.3 kW
      Displacement 32.1 l. and 18 l. 44 % more or 14.1 l.
      Cylinders number 12 and 8 33 % more or 4

      Carrier

      Contact with ground area 6.3 m2 and 4.2 m2 33 % more or 2.1 m2

      4 reasons to buy Caterpillar D9R:

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev

      Gear box

      Maximum forward speed 11.9 km/h and 11.8 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 14.6 km/h and 14 km/h 4 % more or 0.6 km/h

      Carrier

      Specific ground pressure 110.9 kPa and 138.1 kPa 20 % less or 27.2 kPa

      Neutral reasons:

      Standard blade

      Width 5600 mm and 4650 mm
      Height 2773 mm and 1934 mm

      Sizes

      Caterpillar track length on ground level 3855 mm and 3470 mm
      Length without blade 6027 mm and 5180 mm
      Length with blade 10637.5 mm and 7180 mm
      Width between caterpillar tracks 3606 mm and 2930 mm
      Height to cab upper part 4078 mm and 3820 mm

      Operation

      Working weight 104590 kg and 49567 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model 3508B and 3408ETA

      Gear box

      Reverse gears number 3 and 3
      Forward gears number 3 and 3
      Transmission type powershift and powershift transmission

      Carrier

      Standard shoe size 710 mm and 610 mm
      Rolling bearings number on either side 8 and 8
      Track width 2896 mm and 2250 mm

      Images

      Sizes

      1. Length with blade 10637.5 mm 1. Length with blade 7180 mm
      2. Width between caterpillar tracks 3606 mm 2. Width between caterpillar tracks 2930 mm
      3. Height to cab upper part 4078 mm 3. Height to cab upper part 3820 mm
      4. Caterpillar track length on ground level 3855 mm 4. Caterpillar track length on ground level 3470 mm
      5. Clearance 674.5 mm 5. Clearance 591 mm
      6. Length without blade 6027 mm 6. Length without blade 5180 mm

      Carrier

      7. Track width 2896 mm 7. Track width 2250 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 610 mm