- Home/
- Comparison/
- Tracked Tractor/
- Caterpillar D11T vs. Komatsu D375A-5
Caterpillar D11T vs. Komatsu D375A-5
11 reasons to buy Caterpillar D11T:
Sizes
Clearance | 674.5 mm and 610 mm | 10 % more or 64.5 mm |
Operation
Fuel Capacity | 1609 l. and 1050 l. | 35 % more or 559 l. |
Cooling system fluid volume | 238.8 l. and 120 l. | 50 % more or 118.8 l. |
Engine oil volume | 106 l. and 86 l. | 19 % more or 20 l. |
Hydraulic system fluid volume | 243 l. and 138 l. | 43 % more or 105 l. |
Motor
Displacement | 32.1 l. and 23.1 l. | 28 % more or 9.0 l. |
Cylinders number | 12 and 6 | 50 % more or 6 |
Full power | 698 kW and 451 kW | 35 % more or 247 kW |
Effective power | 634 kW and 391 kW | 38 % more or 243 kW |
Carrier
Specific ground pressure | 138.1 kPa and 140 kPa | 1 % less or 1.9 kPa |
Contact with ground area | 6.3 m2 and 4.9 m2 | 22 % more or 1.4 m2 |
3 reasons to buy Komatsu D375A-5:
Operation
Final drive fluid volume | 65 l. and 30 l. | 54 % more or 35 l. |
Hydraulic system
Pump bandwidth | 405 l/min and 250 l/min | 38 % more or 155 l/min |
Gear box
Maximum reverse gear | 15.8 km/h and 14 km/h | 11 % more or 1.8 km/h |
Neutral reasons:
Standard blade
Width | 5600 mm and 4695 mm |
Height | 2773 mm and 2265 mm |
Sizes
Length with blade | 10637.5 mm and 10410 mm |
Width between caterpillar tracks | 3606 mm and 2500 mm |
Height to cab upper part | 4078 mm and 4285 mm |
Operation
Working weight | 104590 kg and 69560 kg |
Motor
Power measured at | 1800 rev / min and 1800 rev / min |
Aspiration | turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow, Exhaust gas recirculation system with cooling |
Manufacturer | Caterpillar and Komatsu |
Model | 3508B and SA6D170E-3 |
Hydraulic system
Overflow valve pressure | 24135 kPa and 20615.3 kPa |
Gear box
Maximum forward speed | 11.8 km/h and 11.8 km/h |
Transmission type | powershift and Komatsu TORQFLOW transmission |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Carrier
Standard shoe size | 710 mm and 610 mm |
Track shoes number per side | 41 and 41 |
Rolling bearings number on either side | 8 and 8 |
Images
Sizes
3. Height to cab upper part | 4078 mm | 3. Height to cab upper part | 4285 mm |
5. Clearance | 674.5 mm | 5. Clearance | 610 mm |
1. Length with blade | 10637.5 mm | 1. Length with blade | 10410 mm |
2. Width between caterpillar tracks | 3606 mm | 2. Width between caterpillar tracks | 2500 mm |
Carrier
8. Standard shoe size | 710 mm | 8. Standard shoe size | 610 mm |