- Home/
- Comparison/
- Mining Dump Truck/
- Caterpillar 773F vs. Hitachi EH5000
Caterpillar 773F vs. Hitachi EH5000
4 reasons to buy Caterpillar 773F:
Weight
| Loaded front weight distribution | 35 % and 32 % | 9 % more or 3 % |
Gear box
| Maximum speed | 67.5 km/h and 66.9 km/h | 1 % more or 0.6 km/h |
Dump
| Lifting time | 9.5 sec and 22 sec | 57 % less or 12.5 sec |
| Lowering time | 12.5 sec and 24 sec | 48 % less or 11.5 sec |
18 reasons to buy Hitachi EH5000:
Weight
| Unloaded rear weight distribution | 51 % and 49 % | 4 % more or 2 % |
| Loaded rear weight distribution | 68 % and 65 % | 4 % more or 3 % |
Sizes
| Clearance | 910 mm and 777 mm | 15 % more or 133 mm |
| Unloading ground clearance | 1860 mm and 626 mm | 66 % more or 1234 mm |
Operation
| Brake / lift system fluid volume | 965 l. and 307 l. | 68 % more or 658 l. |
| Hydraulic system fluid volume | 1256.8 l. and 72 l. | 94 % more or 1184.8 l. |
| Fuel Capacity | 3785 l. and 700 l. | 82 % more or 3085 l. |
| Cooling system fluid volume | 697 l. and 175 l. | 75 % more or 522 l. |
| Engine oil volume | 242 l. and 72 l. | 70 % more or 170 l. |
| Steering system fluid volume | 291 l. and 60 l. | 79 % more or 231 l. |
Motor
| Full power | 2014 kW and 552 kW | 73 % more or 1462 kW |
| Effective power | 1939 kW and 524 kW | 73 % more or 1415 kW |
| Power measured at | 1900 rev / min and 1800 rev / min | 5 % more or 100 rev |
| Displacement | 65 l. and 27 l. | 58 % more or 38 l. |
| Maximum torque | 10930.6 Nm and 3399 Nm | 69 % more or 7531.6 Nm |
| Cylinders number | 16 and 12 | 25 % more or 4 |
Dump
| Brimmed lifting capacity | 143.6 m3 and 25.9 m3 | 82 % more or 117.7 m3 |
| Lifting capacity with top | 196.1 m3 and 35.1 m3 | 82 % more or 161.0 m3 |
Neutral reasons:
Weight
| Weight without load | 44594 kg and 213185 kg |
| Laden weight | 100698 kg and 528208 kg |
| Unloaded front weight distribution | 51 % and 51 % |
Sizes
| Dimensional length | 10334 mm and 14420 mm |
| Overall width | 5425 mm and 9050 mm |
| Headroom | 4435 mm and 7170 mm |
| Wheelbase | 4215 mm and 6150 mm |
| Unloading height | 9261 mm and 14280 mm |
Operation
| Tyre size | 24.00R35(E4) and 53/80R63 E4 Radial |
Motor
| Manufacturer | Caterpillar and Detroit diesel |
| Model | C27 ACERT and DDEC IV 16V-4000 |
| Aspiration | turbocharging and Turbocharged engine and the subsequent air cooling to a low temperature |
Dump
| Nominal payload | 54431.1 kg and 285763.2 kg |
| Discharge angle | 60 degrees and 58 degrees |
Images
Sizes
| 1. Dimensional length | 10334 mm | 1. Dimensional length | 14420 mm |
| 2. Overall width | 5425 mm | 2. Overall width | 9050 mm |
| 3. Headroom | 4435 mm | 3. Headroom | 7170 mm |
| 4. Wheelbase | 4215 mm | 4. Wheelbase | 6150 mm |
| 5. Clearance | 777 mm | 5. Clearance | 910 mm |
| 6. Unloading height | 9261 mm | 6. Unloading height | 14280 mm |
| 7. Unloading ground clearance | 626 mm | 7. Unloading ground clearance | 1860 mm |
Dump
| 8. Discharge angle | 60 degrees | 8. Discharge angle | 58 degrees |