vs.

      Caterpillar 785C vs. Hitachi EH4500-2

      5 reasons to buy Caterpillar 785C:

      Weight

      Unloaded rear weight distribution 53 % and 49.8 % 6 % more or 3.2 %

      Sizes

      Clearance 987 mm and 970 mm 2 % more or 17 mm

      Operation

      Differential/final drive fluid volume 436 l. and 223 l. 49 % more or 213 l.

      Dump

      Lowering time 15.9 sec and 24 sec 34 % less or 8.1 sec
      Lifting time 15.2 sec and 22 sec 31 % less or 6.8 sec

      17 reasons to buy Hitachi EH4500-2:

      Weight

      Loaded front weight distribution 34 % and 33 % 3 % more or 1 %
      Unloaded front weight distribution 50.2 % and 47 % 6 % more or 3.2 %

      Sizes

      Unloading ground clearance 1970 mm and 1284 mm 35 % more or 686 mm

      Operation

      Cooling system fluid volume 697 l. and 379 l. 46 % more or 318 l.
      Hydraulic system fluid volume 1256 l. and 641 l. 49 % more or 615 l.
      Engine oil volume 242 l. and 90 l. 63 % more or 152 l.
      Generator current strength 260 amperes and 75 amperes 71 % more or 185 amperes
      Steering system fluid volume 291 l. and 117 l. 60 % more or 174 l.
      Brake / lift system fluid volume 965 l. and 337 l. 65 % more or 628 l.
      Fuel Capacity 3785 l. and 1893 l. 50 % more or 1892 l.

      Motor

      Full power 2014 kW and 1082 kW 46 % more or 932 kW
      Effective power 1939 kW and 1005 kW 48 % more or 934 kW
      Power measured at 1900 rev / min and 1750 rev / min 8 % more or 150 rev
      Displacement 65 l. and 51.8 l. 20 % more or 13.2 l.

      Gear box

      Maximum speed 66.9 km/h and 54.8 km/h 18 % more or 12.1 km/h

      Dump

      Brimmed lifting capacity 108 m3 and 74 m3 31 % more or 34 m3
      Lifting capacity with top 159 m3 and 91 m3 43 % more or 68 m3

      Neutral reasons:

      Weight

      Loaded rear weight distribution 67 % and 67 %
      Weight without load 102150 kg and 198096 kg
      Laden weight 249480 kg and 480362 kg

      Sizes

      Dimensional length 11024 mm and 14300 mm
      Overall width 6277 mm and 9050 mm
      Headroom 5769 mm and 7240 mm
      Wheelbase 5182 mm and 6150 mm
      Unloading height 11207 mm and 14300 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 33.00-R51 tires and 50.90R57 E4 Radial

      Motor

      Manufacturer Caterpillar and Detroit diesel
      Model 3512B-EUI and DDEC IV 16V-4000
      Cylinders number 16 and 16
      Aspiration turbocharging and Turbocharged engine and the subsequent air cooling to a low temperature

      Dump

      Nominal payload 136077.7 kg and 281227.3 kg
      Discharge angle 49 degrees and 58 degrees

      Images

      Sizes

      1. Dimensional length 11024 mm 1. Dimensional length 14300 mm
      2. Overall width 6277 mm 2. Overall width 9050 mm
      3. Headroom 5769 mm 3. Headroom 7240 mm
      4. Wheelbase 5182 mm 4. Wheelbase 6150 mm
      5. Clearance 987 mm 5. Clearance 970 mm
      6. Unloading height 11207 mm 6. Unloading height 14300 mm
      7. Unloading ground clearance 1284 mm 7. Unloading ground clearance 1970 mm

      Dump

      8. Discharge angle 49 degrees 8. Discharge angle 58 degrees