vs.

      Hitachi EH1600 vs. Caterpillar 775D

      16 reasons to buy Hitachi EH1600:

      Weight

      Loaded rear weight distribution 67 % and 66.7 % 0 % more or 0.3 %

      Sizes

      Unloading ground clearance 810 mm and 660 mm 19 % more or 150 mm
      Clearance 890 mm and 600 mm 33 % more or 290 mm

      Operation

      Generator current strength 100 amperes and 50 amperes 50 % more or 50 amperes
      Fuel Capacity 1003 l. and 700 l. 30 % more or 303 l.
      Cooling system fluid volume 268.7 l. and 151 l. 44 % more or 117.7 l.
      Engine oil volume 140 l. and 68 l. 51 % more or 72 l.
      Steering system fluid volume 117 l. and 60 l. 49 % more or 57 l.
      Brake / lift system fluid volume 318 l. and 307 l. 3 % more or 11 l.

      Motor

      Full power 783 kW and 540.6 kW 31 % more or 242.4 kW
      Effective power 732 kW and 516.8 kW 29 % more or 215.2 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 30.5 l. and 27 l. 11 % more or 3.5 l.

      Dump

      Brimmed lifting capacity 35.4 m3 and 31.4 m3 11 % more or 4.0 m3
      Lifting capacity with top 57.1 m3 and 41.5 m3 27 % more or 15.6 m3
      Lowering time 12.1 sec and 12.5 sec 3 % less or 0.4 sec

      5 reasons to buy Caterpillar 775D:

      Weight

      Loaded front weight distribution 33.3 % and 33 % 1 % more or 0.3 %

      Operation

      Differential/final drive fluid volume 155 l. and 140.1 l. 10 % more or 14.9 l.

      Gear box

      Forward gears number 7 and 6 14 % more or 1
      Maximum speed 65.8 km/h and 58.6 km/h 11 % more or 7.2 km/h

      Dump

      Lifting time 9.5 sec and 12.8 sec 26 % less or 3.3 sec

      Neutral reasons:

      Weight

      Laden weight 160664 kg and 106594.2 kg
      Weight without load 70920 kg and 43227.4 kg

      Sizes

      Unloading height 9780 mm and 8800 mm
      Dimensional length 10110 mm and 9700 mm
      Overall width 5890 mm and 3970 mm
      Headroom 5310 mm and 4410 mm
      Wheelbase 4570 mm and 4190 mm

      Operation

      Tyre size 27.00R49 E4 Radial and 24.00-R35
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Caterpillar
      Cylinders number 12 and 12
      Model QST 30 and 3412ETA

      Gear box

      Transmission type Allison DP-8963, planetary type, automatic gear change. Built-in torque converter with automatic lock gear changes in all ranges. and powershift
      Reverse gears number 1 and 1

      Dump

      Nominal payload 88904.1 kg and 63366.9 kg
      Discharge angle 62 degrees and 60 degrees

      Images

      Sizes

      1. Dimensional length 10110 mm 1. Dimensional length 9700 mm
      2. Overall width 5890 mm 2. Overall width 3970 mm
      3. Headroom 5310 mm 3. Headroom 4410 mm
      4. Wheelbase 4570 mm 4. Wheelbase 4190 mm
      5. Clearance 890 mm 5. Clearance 600 mm
      6. Unloading height 9780 mm 6. Unloading height 8800 mm
      7. Unloading ground clearance 810 mm 7. Unloading ground clearance 660 mm

      Dump

      8. Discharge angle 62 degrees 8. Discharge angle 60 degrees