vs.

      Hitachi EH600 vs. Caterpillar 775D

      4 reasons to buy Hitachi EH600:

      Weight

      Unloaded front weight distribution 50 % and 47.3 % 5 % more or 2.7 %
      Loaded rear weight distribution 68 % and 66.7 % 2 % more or 1.3 %

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Dump

      Lowering time 12 sec and 12.5 sec 4 % less or 0.5 sec

      16 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 50 % 5 % more or 2.7 %
      Loaded front weight distribution 33.3 % and 32 % 4 % more or 1.3 %

      Sizes

      Clearance 600 mm and 450 mm 25 % more or 150 mm
      Unloading ground clearance 660 mm and 460 mm 30 % more or 200 mm

      Operation

      Engine oil volume 68 l. and 34 l. 50 % more or 34 l.
      Fuel Capacity 700 l. and 550 l. 21 % more or 150 l.
      Cooling system fluid volume 151 l. and 70 l. 54 % more or 81 l.

      Motor

      Cylinders number 12 and 6 50 % more or 6
      Full power 540.6 kW and 298 kW 45 % more or 242.6 kW
      Effective power 516.8 kW and 286 kW 45 % more or 230.8 kW
      Displacement 27 l. and 14 l. 48 % more or 13 l.

      Gear box

      Maximum speed 65.8 km/h and 60 km/h 9 % more or 5.8 km/h
      Forward gears number 7 and 5 29 % more or 2

      Dump

      Lifting capacity with top 41.5 m3 and 21 m3 49 % more or 20.5 m3
      Lifting time 9.5 sec and 12 sec 21 % less or 2.5 sec
      Brimmed lifting capacity 31.4 m3 and 14.6 m3 54 % more or 16.8 m3

      Neutral reasons:

      Weight

      Weight without load 23790 kg and 43227.4 kg
      Laden weight 56911 kg and 106594.2 kg

      Sizes

      Wheelbase 3650 mm and 4190 mm
      Unloading height 7730 mm and 8800 mm
      Dimensional length 8040 mm and 9700 mm
      Overall width 3730 mm and 3970 mm
      Headroom 3600 mm and 4410 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size Michelin 18.00R25 E4 and 24.00-R35

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and Caterpillar
      Model N14-C400 and 3412ETA

      Gear box

      Transmission type Allison CLBT 754. Automatic transmission of planetary type with integrated retarder and  starting with the second transmission and powershift
      Reverse gears number 1 and 1

      Dump

      Discharge angle 55 degrees and 60 degrees
      Nominal payload 29029.9 kg and 63366.9 kg

      Images

      Sizes

      5. Clearance 450 mm 5. Clearance 600 mm
      6. Unloading height 7730 mm 6. Unloading height 8800 mm
      7. Unloading ground clearance 460 mm 7. Unloading ground clearance 660 mm
      1. Dimensional length 8040 mm 1. Dimensional length 9700 mm
      2. Overall width 3730 mm 2. Overall width 3970 mm
      3. Headroom 3600 mm 3. Headroom 4410 mm
      4. Wheelbase 3650 mm 4. Wheelbase 4190 mm

      Dump

      8. Discharge angle 55 degrees 8. Discharge angle 60 degrees