vs.

      Komatsu HD680 vs. Hitachi EH700-2

      7 reasons to buy Komatsu HD680:

      Weight

      Loaded rear weight distribution 68 % and 67 % 1 % more or 1 %

      Sizes

      Clearance 565 mm and 510 mm 10 % more or 55 mm
      Unloading ground clearance 540 mm and 480 mm 11 % more or 60 mm

      Motor

      Full power 577.9 kW and 391.5 kW 32 % more or 186.4 kW
      Displacement 28 l. and 15 l. 46 % more or 13 l.

      Dump

      Brimmed lifting capacity 32 m3 and 17 m3 47 % more or 15 m3
      Lifting capacity with top 44 m3 and 24 m3 45 % more or 20 m3

      3 reasons to buy Hitachi EH700-2:

      Weight

      Loaded front weight distribution 33 % and 32 % 3 % more or 1 %

      Gear box

      Reverse gears number 2 and 1 50 % more or 1
      Maximum speed 76 km/h and 65 km/h 14 % more or 11 km/h

      Neutral reasons:

      Weight

      Weight without load 46500 kg and 31900 kg
      Laden weight 114555 kg and 69900 kg

      Sizes

      Headroom 4290 mm and 4320 mm
      Overall width 4675 mm and 4760 mm
      Wheelbase 4750 mm and 3780 mm
      Unloading height 8720 mm and 8130 mm
      Dimensional length 9790 mm and 8660 mm

      Operation

      Tyre size 24.00-35-42PR and 18R33(**)E4 Radial

      Motor

      Manufacturer Cummins and Cummins
      Model HD680 and QSX15-525

      Gear box

      Forward gears number 6 and 6
      Transmission type hydraulic gear reducer and TORQFLOW and Allison M5610A planetary, fully automatic powershift

      Dump

      Discharge angle 65 degrees and 60 degrees

      Images

      Sizes

      5. Clearance 565 mm 5. Clearance 510 mm
      6. Unloading height 8720 mm 6. Unloading height 8130 mm
      7. Unloading ground clearance 540 mm 7. Unloading ground clearance 480 mm
      1. Dimensional length 9790 mm 1. Dimensional length 8660 mm
      2. Overall width 4675 mm 2. Overall width 4760 mm
      3. Headroom 4290 mm 3. Headroom 4320 mm
      4. Wheelbase 4750 mm 4. Wheelbase 3780 mm

      Dump

      8. Discharge angle 65 degrees 8. Discharge angle 60 degrees