- Home/
- Comparison/
- Mining Dump Truck/
- Terex TR100 vs. Caterpillar 789C
Terex TR100 vs. Caterpillar 789C
6 reasons to buy Terex TR100:
Weight
| Unloaded front weight distribution | 49 % and 47 % | 4 % more or 2 % |
| Loaded front weight distribution | 34 % and 33 % | 3 % more or 1 % |
Operation
| Engine oil volume | 108 l. and 76 l. | 30 % more or 32 l. |
| Hydraulic system fluid volume | 557 l. and 531 l. | 5 % more or 26 l. |
Motor
| Power measured at | 2100 rev / min and 1750 rev / min | 17 % more or 350 rev |
Dump
| Lifting time | 16.3 sec and 18.9 sec | 14 % less or 2.6 sec |
16 reasons to buy Caterpillar 789C:
Weight
| Unloaded rear weight distribution | 53 % and 51 % | 4 % more or 2 % |
| Loaded rear weight distribution | 67 % and 66 % | 1 % more or 1 % |
Sizes
| Unloading ground clearance | 1330 mm and 700 mm | 47 % more or 630 mm |
| Clearance | 1173 mm and 800 mm | 32 % more or 373 mm |
Operation
| Fuel Capacity | 3222 l. and 1275 l. | 60 % more or 1947 l. |
| Cooling system fluid volume | 663 l. and 276 l. | 58 % more or 387 l. |
| Differential/final drive fluid volume | 583 l. and 61 l. | 90 % more or 522 l. |
| Steering system fluid volume | 189 l. and 72 l. | 62 % more or 117 l. |
| Generator current strength | 75 amperes and 70 amperes | 7 % more or 5 amperes |
Motor
| Displacement | 69 l. and 31.9 l. | 54 % more or 37.1 l. |
| Full power | 1417 kW and 783 kW | 45 % more or 634 kW |
| Effective power | 1320 kW and 703.2 kW | 47 % more or 616.8 kW |
Gear box
| Maximum speed | 52.6 km/h and 48.5 km/h | 8 % more or 4.1 km/h |
Dump
| Brimmed lifting capacity | 92 m3 and 41.6 m3 | 55 % more or 50.4 m3 |
| Lifting capacity with top | 105 m3 and 57 m3 | 46 % more or 48 m3 |
| Lowering time | 17.3 sec and 18 sec | 4 % less or 0.7 sec |
Neutral reasons:
Weight
| Weight without load | 67000.1 kg and 135670 kg |
| Laden weight | 157720.9 kg and 317515 kg |
Sizes
| Wheelbase | 4600 mm and 5700 mm |
| Unloading height | 9000 mm and 11950 mm |
| Dimensional length | 10800 mm and 12177 mm |
| Overall width | 5900 mm and 7674 mm |
| Headroom | 4900 mm and 6182 mm |
Operation
| Operating voltage | 24 V and 24 V |
| Tyre size | 27.00-49 (48 Pr) e-4 and 37.00-R57(E4) |
Motor
| Cylinders number | 16 and 16 |
| Aspiration | turbocharging and turbocharging |
| Manufacturer | Detroit diesel and Caterpillar |
| Model | MTU 16V-2000TA DDEC and 3516B EUI |
Gear box
| Transmission type | Allison M8610 and 6-planetary gear shift with direct injection |
| Forward gears number | 6 and 6 |
| Reverse gears number | 1 and 1 |
Dump
| Nominal payload | 90718.5 kg and 176901 kg |
| Discharge angle | 58 degrees and 49.5 degrees |
Images
Sizes
| 3. Headroom | 4900 mm | 3. Headroom | 6182 mm |
| 4. Wheelbase | 4600 mm | 4. Wheelbase | 5700 mm |
| 5. Clearance | 800 mm | 5. Clearance | 1173 mm |
| 6. Unloading height | 9000 mm | 6. Unloading height | 11950 mm |
| 7. Unloading ground clearance | 700 mm | 7. Unloading ground clearance | 1330 mm |
| 1. Dimensional length | 10800 mm | 1. Dimensional length | 12177 mm |
| 2. Overall width | 5900 mm | 2. Overall width | 7674 mm |
Dump
| 8. Discharge angle | 58 degrees | 8. Discharge angle | 49.5 degrees |