- Home/
- Comparison/
- Mining Dump Truck/
- Terex TR35 vs. Caterpillar 775D
Terex TR35 vs. Caterpillar 775D
6 reasons to buy Terex TR35:
Weight
Unloaded front weight distribution | 48 % and 47.3 % | 1 % more or 0.7 % |
Loaded rear weight distribution | 67 % and 66.7 % | 0 % more or 0.3 % |
Operation
Generator current strength | 70 amperes and 50 amperes | 29 % more or 20 amperes |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Dump
Lowering time | 9.5 sec and 12.5 sec | 24 % less or 3.0 sec |
19 reasons to buy Caterpillar 775D:
Weight
Unloaded rear weight distribution | 52.7 % and 52 % | 1 % more or 0.7 % |
Loaded front weight distribution | 33.3 % and 33 % | 1 % more or 0.3 % |
Sizes
Unloading ground clearance | 660 mm and 450 mm | 32 % more or 210 mm |
Clearance | 600 mm and 500 mm | 17 % more or 100 mm |
Operation
Fuel Capacity | 700 l. and 371 l. | 47 % more or 329 l. |
Cooling system fluid volume | 151 l. and 94 l. | 38 % more or 57 l. |
Engine oil volume | 68 l. and 34 l. | 50 % more or 34 l. |
Differential/final drive fluid volume | 155 l. and 57 l. | 63 % more or 98 l. |
Steering system fluid volume | 60 l. and 47 l. | 22 % more or 13 l. |
Motor
Cylinders number | 12 and 6 | 50 % more or 6 |
Full power | 540.6 kW and 298.3 kW | 45 % more or 242.3 kW |
Effective power | 516.8 kW and 275.2 kW | 47 % more or 241.6 kW |
Displacement | 27 l. and 10.8 l. | 60 % more or 16.2 l. |
Maximum torque | 2757.7 Nm and 1898.1 Nm | 31 % more or 859.6 Nm |
Gear box
Forward gears number | 7 and 5 | 29 % more or 2 |
Maximum speed | 65.8 km/h and 59 km/h | 10 % more or 6.8 km/h |
Dump
Brimmed lifting capacity | 31.4 m3 and 15.3 m3 | 51 % more or 16.1 m3 |
Lifting capacity with top | 41.5 m3 and 19.4 m3 | 53 % more or 22.1 m3 |
Lifting time | 9.5 sec and 14 sec | 32 % less or 4.5 sec |
Neutral reasons:
Weight
Weight without load | 23722.9 kg and 43227.4 kg |
Laden weight | 55474.3 kg and 106594.2 kg |
Sizes
Dimensional length | 8000 mm and 9700 mm |
Overall width | 4000 mm and 3970 mm |
Headroom | 3900 mm and 4410 mm |
Wheelbase | 3600 mm and 4190 mm |
Unloading height | 6900 mm and 8800 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 18.00-25 (32PR) E-3 and 24.00-R35 |
Motor
Manufacturer | Cummins and Caterpillar |
Model | QSM11-C400E and 3412ETA |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Gear box
Transmission type | Allison 4500 RDS and powershift |
Reverse gears number | 1 and 1 |
Dump
Nominal payload | 31751.5 kg and 63366.9 kg |
Discharge angle | 58 degrees and 60 degrees |
Images
Sizes
1. Dimensional length | 8000 mm | 1. Dimensional length | 9700 mm |
2. Overall width | 4000 mm | 2. Overall width | 3970 mm |
3. Headroom | 3900 mm | 3. Headroom | 4410 mm |
4. Wheelbase | 3600 mm | 4. Wheelbase | 4190 mm |
5. Clearance | 500 mm | 5. Clearance | 600 mm |
6. Unloading height | 6900 mm | 6. Unloading height | 8800 mm |
7. Unloading ground clearance | 450 mm | 7. Unloading ground clearance | 660 mm |
Dump
8. Discharge angle | 58 degrees | 8. Discharge angle | 60 degrees |