vs.

      Terex TR45 vs. Caterpillar 775D

      8 reasons to buy Terex TR45:

      Weight

      Unloaded front weight distribution 48 % and 47.3 % 1 % more or 0.7 %
      Loaded front weight distribution 34 % and 33.3 % 2 % more or 0.7 %

      Operation

      Generator current strength 70 amperes and 50 amperes 29 % more or 20 amperes
      Steering system fluid volume 85 l. and 60 l. 29 % more or 25 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Gear box

      Reverse gears number 2 and 1 50 % more or 1

      Dump

      Lowering time 9 sec and 12.5 sec 28 % less or 3.5 sec

      18 reasons to buy Caterpillar 775D:

      Weight

      Unloaded rear weight distribution 52.7 % and 52 % 1 % more or 0.7 %
      Loaded rear weight distribution 66.7 % and 66 % 1 % more or 0.7 %

      Sizes

      Clearance 600 mm and 585 mm 2 % more or 15 mm
      Unloading ground clearance 660 mm and 585 mm 11 % more or 75 mm

      Operation

      Fuel Capacity 700 l. and 606 l. 13 % more or 94 l.
      Cooling system fluid volume 151 l. and 144 l. 5 % more or 7 l.
      Engine oil volume 68 l. and 62 l. 9 % more or 6 l.
      Differential/final drive fluid volume 155 l. and 60 l. 61 % more or 95 l.

      Motor

      Full power 540.6 kW and 391.5 kW 28 % more or 149.1 kW
      Effective power 516.8 kW and 369.1 kW 29 % more or 147.7 kW
      Displacement 27 l. and 18.8 l. 30 % more or 8.2 l.
      Maximum torque 2757.7 Nm and 2406.6 Nm 13 % more or 351.1 Nm
      Cylinders number 12 and 6 50 % more or 6

      Gear box

      Forward gears number 7 and 6 14 % more or 1
      Maximum speed 65.8 km/h and 65 km/h 1 % more or 0.8 km/h

      Dump

      Lifting capacity with top 41.5 m3 and 26 m3 37 % more or 15.5 m3
      Lifting time 9.5 sec and 13 sec 27 % less or 3.5 sec
      Brimmed lifting capacity 31.4 m3 and 19.6 m3 38 % more or 11.8 m3

      Neutral reasons:

      Weight

      Weight without load 37135.6 kg and 43227.4 kg
      Laden weight 77958.9 kg and 106594.2 kg

      Sizes

      Dimensional length 8700 mm and 9700 mm
      Overall width 4630 mm and 3970 mm
      Headroom 4245 mm and 4410 mm
      Wheelbase 3940 mm and 4190 mm
      Unloading height 7645 mm and 8800 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 21.00-35 layers of diagonal cord and 24.00-R35

      Motor

      Manufacturer Cummins and Caterpillar
      Model QSK19-C525 and 3412ETA
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Gear box

      Transmission type Allison M5610AR and powershift

      Dump

      Discharge angle 58 degrees and 60 degrees
      Nominal payload 40823.3 kg and 63366.9 kg

      Images

      Sizes

      1. Dimensional length 8700 mm 1. Dimensional length 9700 mm
      2. Overall width 4630 mm 2. Overall width 3970 mm
      3. Headroom 4245 mm 3. Headroom 4410 mm
      4. Wheelbase 3940 mm 4. Wheelbase 4190 mm
      5. Clearance 585 mm 5. Clearance 600 mm
      6. Unloading height 7645 mm 6. Unloading height 8800 mm
      7. Unloading ground clearance 585 mm 7. Unloading ground clearance 660 mm

      Dump

      8. Discharge angle 58 degrees 8. Discharge angle 60 degrees