- Home/
- Comparison/
- Mining Dump Truck/
- Terex TR60 vs. Caterpillar 773B
Terex TR60 vs. Caterpillar 773B
10 reasons to buy Terex TR60:
Weight
| Unloaded front weight distribution | 48 % and 47.3 % | 1 % more or 0.7 % | 
| Loaded front weight distribution | 34 % and 33.3 % | 2 % more or 0.7 % | 
Sizes
| Clearance | 700 mm and 591 mm | 16 % more or 109 mm | 
| Unloading ground clearance | 600 mm and 566 mm | 6 % more or 34 mm | 
Operation
| Cooling system fluid volume | 170 l. and 151 l. | 11 % more or 19 l. | 
Motor
| Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev | 
Gear box
| Reverse gears number | 2 and 1 | 50 % more or 1 | 
| Maximum speed | 57.5 km/h and 57.3 km/h | 0 % more or 0.2 km/h | 
Dump
| Lowering time | 4 sec and 14.2 sec | 72 % less or 10.2 sec | 
| Lifting capacity with top | 35 m3 and 34.1 m3 | 3 % more or 0.9 m3 | 
11 reasons to buy Caterpillar 773B:
Weight
| Unloaded rear weight distribution | 52.7 % and 52 % | 1 % more or 0.7 % | 
| Loaded rear weight distribution | 66.7 % and 66 % | 1 % more or 0.7 % | 
Operation
| Fuel Capacity | 700 l. and 606 l. | 13 % more or 94 l. | 
| Engine oil volume | 68 l. and 66 l. | 3 % more or 2 l. | 
| Differential/final drive fluid volume | 155 l. and 52 l. | 66 % more or 103 l. | 
| Steering system fluid volume | 81 l. and 72 l. | 11 % more or 9 l. | 
Motor
| Full power | 509 kW and 484.7 kW | 5 % more or 24.3 kW | 
| Effective power | 485 kW and 481 kW | 1 % more or 4 kW | 
| Displacement | 27 l. and 18.8 l. | 30 % more or 8.2 l. | 
Gear box
| Forward gears number | 7 and 6 | 14 % more or 1 | 
Dump
| Lifting time | 11.4 sec and 16 sec | 29 % less or 4.6 sec | 
Neutral reasons:
Weight
| Weight without load | 41249.7 kg and 39396 kg | 
| Laden weight | 95680.8 kg and 92534 kg | 
Sizes
| Dimensional length | 9100 mm and 9270 mm | 
| Overall width | 5000 mm and 4700 mm | 
| Headroom | 4400 mm and 4230 mm | 
| Wheelbase | 4100 mm and 4190 mm | 
| Unloading height | 8000 mm and 8660 mm | 
Operation
| Tyre size | 24.00-35 layers of diagonal cord and 21.00-35 32PR (E-3) | 
| Operating voltage | 24 V and 24 V | 
Motor
| Manufacturer | Cummins and Caterpillar | 
| Model | QSK19-C650 and 3412 | 
| Aspiration | turbocharging and turbocharging and cooling at the outlet | 
Dump
| Nominal payload | 54431.1 kg and 53977.5 kg | 
| Brimmed lifting capacity | 26 m3 and 26 m3 | 
| Discharge angle | 58 degrees and 54.5 degrees | 
Images
Sizes
| 1. Dimensional length | 9100 mm | 1. Dimensional length | 9270 mm | 
| 2. Overall width | 5000 mm | 2. Overall width | 4700 mm | 
| 3. Headroom | 4400 mm | 3. Headroom | 4230 mm | 
| 4. Wheelbase | 4100 mm | 4. Wheelbase | 4190 mm | 
| 5. Clearance | 700 mm | 5. Clearance | 591 mm | 
| 6. Unloading height | 8000 mm | 6. Unloading height | 8660 mm | 
| 7. Unloading ground clearance | 600 mm | 7. Unloading ground clearance | 566 mm | 
Dump
| 8. Discharge angle | 58 degrees | 8. Discharge angle | 54.5 degrees | 
 
                             
                            