- Home/
- Comparison/
- Mining Excavator/
- Hitachi EX2500 vs. Hitachi EX2500-6
Hitachi EX2500 vs. Hitachi EX2500-6
5 reasons to buy Hitachi EX2500:
Sizes
| Upper structure clearance | 2230 mm and 2140 mm | 4 % more or 90 mm |
Shovel boom/sections 1
| Maximum unloading height | 10360 mm and 10330 mm | 0 % more or 30 mm |
Operation
| Generator current strength | 150 amperes and 140 amperes | 7 % more or 10 amperes |
Carrier
| Excavator specific ground pressure with support 1 | 172 kPa and 181 kPa | 5 % less or 9 kPa |
| Bucket loader specific ground pressure | 174 kPa and 181 kPa | 4 % less or 7 kPa |
11 reasons to buy Hitachi EX2500-6:
Shovel boom/sections 1
| Maximum excavation depth | 8600 mm and 8570 mm | 0 % more or 30 mm |
| Maximum radius on ground level | 16530 mm and 16500 mm | 0 % more or 30 mm |
Operation
| Fuel Capacity | 5000 l. and 3600 l. | 28 % more or 1400 l. |
| Cooling system fluid volume | 476 l. and 380 l. | 20 % more or 96 l. |
| Engine oil volume | 378 l. and 260 l. | 31 % more or 118 l. |
Motor
| Cylinders number | 16 and 12 | 25 % more or 4 |
| Full power | 1044 kW and 1006.7 kW | 4 % more or 37.3 kW |
| Effective power | 994 kW and 970.9 kW | 2 % more or 23.1 kW |
| Displacement | 50 l. and 45 l. | 10 % more or 5 l. |
Carrier
| Loading shovel operational weight | 249000 kg and 242000 kg | 3 % more or 7000 kg |
| Unloaded backhoe shovel operational weight with support 1 | 248000 kg and 239000 kg | 4 % more or 9000 kg |
Neutral reasons:
Sizes
| Caterpillar track length | 7870 mm and 7870 mm |
| Caterpillar track length on ground level | 6120 mm and 6120 mm |
| Clearance | 800 mm and 800 mm |
| Width between caterpillar tracks | 6000 mm and 6000 mm |
| Height to cab upper part | 7040 mm and 7250 mm |
| Caterpillar track height | 2060 mm and 2060 mm |
Shovel boom/sections 1
| Maximum vertical wall digging depth | 5070 mm and 5070 mm |
| Maximum cut height | 16160 mm and 16060 mm |
| Backhoe shovel boom / section | 9000mm boom with 4200mm with lever and Boom 9000mm/Section 4200mm |
Shovel
| Bucket initial volume | 15 m3 and 15 m3 |
Operation
| Rotation speed | 3.8 rev / min and 3.8 rev / min |
| Operating voltage | 24 V and 24 V |
| Hydraulic system fluid volume | 2950 l. and 2950 l. |
Motor
| Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
| Manufacturer | Cummins and Cummins |
| Model | QSK45-C and QSKTA50-CE |
| Power measured at | 1800 rev / min and 1800 rev / min |
Loading bucket
| Maximum unloading height | 10350 mm and 10350 mm |
| Maximum excavation depth | 3720 mm and 3720 mm |
| Maximum digging radius | 14060 mm and 14060 mm |
| Maximum cut height | 15010 mm and 15010 mm |
Carrier
| Bucket loader support width | 1000 mm and 1000 mm |
| Maximum travel speed | 2.3 km/h and 2.3 km/h |
| Rear platform swing radius | 6290 mm and 6290 mm |
| Upper rollers number | 3 and 3 |
| Lower rollers number | 8 and 8 |
| Track shoes number on either side | 39 and 39 |
| Track width | 5000 mm and 5000 mm |
| Backhoe shovel support width 1 | 1000 mm and 1000 mm |
Images
Sizes
| 2. Width between caterpillar tracks | 6000 mm | 2. Width between caterpillar tracks | 6000 mm |
| 4. Caterpillar track length on ground level | 6120 mm | 4. Caterpillar track length on ground level | 6120 mm |
| 5. Clearance | 800 mm | 5. Clearance | 800 mm |
| 7. Height to cab upper part | 7040 mm | 7. Height to cab upper part | 7250 mm |
Loading bucket
| 17. Maximum cut height | 15010 mm | 17. Maximum cut height | 15010 mm |
| 18. Maximum unloading height | 10350 mm | 18. Maximum unloading height | 10350 mm |
| 19. Maximum digging radius | 14060 mm | 19. Maximum digging radius | 14060 mm |
| 20. Maximum excavation depth | 3720 mm | 20. Maximum excavation depth | 3720 mm |
Carrier
| 6. Track width | 5000 mm | 6. Track width | 5000 mm |
| 14. Bucket loader support width | 1000 mm | 14. Bucket loader support width | 1000 mm |