vs.

      Iveco AD260S43Y/PS (2005) vs. Iveco AT260T44 (2005)

      5 reasons to buy Iveco AD260S43Y/PS (2005):

      Wheelbase specifications 3

      Turn radius 8865 mm and 9950 mm 11 % less or 1085 mm

      Wheelbase specifications 2

      Turn radius 8540 mm and 9200 mm 7 % less or 660 mm

      Wheelbase specifications 1

      Turn radius 8040 mm and 8725 mm 8 % less or 685 mm

      Motor

      Power measured at 2100 rev / min and 1900 rev / min 10 % more or 200 rev
      Torque measured at 1590 rev / min and 1530 rev / min 4 % more or 60 rev

      4 reasons to buy Iveco AT260T44 (2005):

      Motor

      Effective torque 2200 Nm and 1900 Nm 14 % more or 300 Nm
      Full power 353 kW and 316 kW 10 % more or 37 kW
      Displacement 12.9 l. and 10.3 l. 20 % more or 2.6 l.

      Gear box

      Forward gears number 16 and 12 25 % more or 4

      Neutral reasons:

      Wheelbase specifications 3

      Dimensional length 9518 mm and 9150 mm
      Wheelbase 4500 mm and 4800 mm
      Length from cab rear to frame end 7553 mm and 5485 mm
      Length from rear axle center to frame end 2073 mm and 1495 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7450 kg and 8580 kg

      Wheelbase specifications 2

      Wheelbase 4200 mm and 4200 mm
      Dimensional length 9262 mm and 8190 mm
      Length from cab rear to frame end 7297 mm and 5525 mm
      Length from rear axle center to frame end 2117 mm and 1135 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7430 kg and 8530 kg

      Wheelbase specifications 1

      Wheelbase 3800 mm and 3820 mm
      Dimensional length 8502 mm and 8170 mm
      Length from cab rear to frame end 6537 mm and 5505 mm
      Length from rear axle center to frame end 1757 mm and 1495 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7330 kg and 8550 kg

      Sizes

      Height to cab upper part 2965 mm and 3045 mm
      Rear axles number 2 and 2
      Tyre size 315/80R22.5 and 315/80R22.5
      Class by weight 8 and 8

      Motor

      Manufacturer Iveco and Iveco
      Model Cursor 10 (316 cm) and Cursor 13 (353 cm)
      Cylinders number 6 and 6
      Hole 125 mm and 135 mm
      Strokes 140 mm and 150 mm
      Aspiration turbocharging and turbocharging

      Gear box

      Top gear ratio 1 :1 and 0.78 :1
      Low gear ratio 15.9 :1 and 12.3 :1
      Manufacturer Eurotronic and ZF
      Model AS2301 and 16s 181OD
      Reverse gears number 2 and 2