vs.

      Iveco AT260S43Y/P (2005) vs. Iveco AT260T38 (2005)

      5 reasons to buy Iveco AT260S43Y/P (2005):

      Wheelbase specifications 3

      Turn radius 9640 mm and 9950 mm 3 % less or 310 mm

      Motor

      Full power 316 kW and 280 kW 11 % more or 36 kW
      Power measured at 2100 rev / min and 1900 rev / min 10 % more or 200 rev
      Effective torque 1900 Nm and 1800 Nm 5 % more or 100 Nm
      Torque measured at 1590 rev / min and 1480 rev / min 7 % more or 110 rev

      4 reasons to buy Iveco AT260T38 (2005):

      Wheelbase specifications 2

      Turn radius 9200 mm and 9240 mm 0 % less or 40 mm

      Wheelbase specifications 1

      Turn radius 8725 mm and 8915 mm 2 % less or 190 mm

      Motor

      Displacement 12.9 l. and 10.3 l. 20 % more or 2.6 l.

      Gear box

      Forward gears number 16 and 12 25 % more or 4

      Neutral reasons:

      Wheelbase specifications 3

      Wheelbase 4800 mm and 4800 mm
      Dimensional length 9818 mm and 9150 mm
      Length from cab rear to frame end 7413 mm and 5485 mm
      Length from rear axle center to frame end 2073 mm and 1495 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7320 kg and 8580 kg

      Wheelbase specifications 2

      Wheelbase 4500 mm and 4200 mm
      Dimensional length 9518 mm and 8190 mm
      Length from cab rear to frame end 7113 mm and 5525 mm
      Length from rear axle center to frame end 2073 mm and 1135 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7290 kg and 8530 kg

      Wheelbase specifications 1

      Dimensional length 9262 mm and 8170 mm
      Length from cab rear to frame end 6857 mm and 5505 mm
      Wheelbase 4200 mm and 3820 mm
      Length from rear axle center to frame end 2117 mm and 1495 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 7270 kg and 8550 kg

      Sizes

      Height to cab upper part 2955 mm and 3045 mm
      Rear axles number 2 and 2
      Tyre size 315/80R22.5 and 315/80R22.5
      Class by weight 8 and 8

      Motor

      Hole 125 mm and 135 mm
      Manufacturer Iveco and Iveco
      Strokes 140 mm and 150 mm
      Model Cursor 10 (316 cm) and Cursor 13 (280 cm)
      Aspiration turbocharging and turbocharging
      Cylinders number 6 and 6

      Gear box

      Top gear ratio 1 :1 and 0.84 :1
      Low gear ratio 15.9 :1 and 13.8 :1
      Manufacturer Eurotronic and ZF
      Model AS2301 and 16s 151OD
      Reverse gears number 2 and 2