- Home/
- Comparison/
- Tipper/
- Iveco AT440S40T/P (2005) vs. Iveco AT260T44 (2005)
Iveco AT440S40T/P (2005) vs. Iveco AT260T44 (2005)
3 reasons to buy Iveco AT440S40T/P (2005):
Wheelbase specifications 2
Turn radius | 7365 mm and 9200 mm | 20 % less or 1835 mm |
Wheelbase specifications 1
Turn radius | 7115 mm and 8725 mm | 18 % less or 1610 mm |
Motor
Power measured at | 2100 rev / min and 1900 rev / min | 10 % more or 200 rev |
5 reasons to buy Iveco AT260T44 (2005):
Sizes
Rear axles number | 2 and 1 | 50 % more or 1 |
Motor
Full power | 353 kW and 294 kW | 17 % more or 59 kW |
Effective torque | 2200 Nm and 1900 Nm | 14 % more or 300 Nm |
Torque measured at | 1530 rev / min and 1480 rev / min | 3 % more or 50 rev |
Displacement | 12.9 l. and 10.3 l. | 20 % more or 2.6 l. |
Neutral reasons:
Wheelbase specifications 2
Dimensional length | 6258 mm and 8190 mm |
Total gross vehicle weight | 19000 kg and 26000 kg |
Length from cab rear to frame end | 3908 mm and 5525 mm |
Chassis total weight | 6410 kg and 8530 kg |
Length from rear axle center to frame end | 1048 mm and 1135 mm |
Wheelbase | 3800 mm and 4200 mm |
Wheelbase specifications 1
Wheelbase | 3650 mm and 3820 mm |
Dimensional length | 6108 mm and 8170 mm |
Length from cab rear to frame end | 3758 mm and 5505 mm |
Length from rear axle center to frame end | 1048 mm and 1495 mm |
Total gross vehicle weight | 19000 kg and 26000 kg |
Chassis total weight | 6390 kg and 8550 kg |
Sizes
Height to cab upper part | 2907 mm and 3045 mm |
Tyre size | 295/80R22.5 and 315/80R22.5 |
Class by weight | 8 and 8 |
Motor
Manufacturer | Iveco and Iveco |
Model | Cursor 10 (294 cm) and Cursor 13 (353 cm) |
Cylinders number | 6 and 6 |
Hole | 125 mm and 135 mm |
Strokes | 140 mm and 150 mm |
Aspiration | turbocharging and turbocharging |
Gear box
Top gear ratio | 1 :1 and 0.84 :1 |
Model | AS2301 and AS2530 TO |
Low gear ratio | 15.9 :1 and 13.8 :1 |
Forward gears number | 12 and 12 |
Manufacturer | Eurotronic and Eurotronic |
Reverse gears number | 2 and 2 |