Construction Machinery. Crawler-Mounted Loader John Deere 605C
Sizes
| Length to front of caterpillar track | 3859 mm |
| Length with bucket on ground level | 5383 mm |
| Width to outside of caterpillar track | 2057 mm |
| Height to cab upper part | 2998 mm |
| Clearance | 408 mm |
| Ground clearance at full height and unloading | 2679 mm |
| Radius at high altitude unloading | 890 mm |
Operation
| Fuel Capacity | 180 l. |
| Cooling system fluid volume | 24 l. |
| Engine oil volume | 14.7 l. |
| Each final drive fluid volume | 8.8 l. |
| Hydraulic system fluid volume | 126 l. |
| Static tipping load | 6690 kg |
| Breakout force in folded state | 100 kN |
| Bucket capacity with top | 1.3 m3 |
| Operating voltage | 24 V |
| Generator current strength | 45 amperes |
| Maximum speed | 8.9 km/h |
| Working weight | 10704.8 kg |
Motor
| Manufacturer | John Deere |
| Model | 4045TF278 |
| Effective power | 73.8 kW |
| Displacement | 4.5 l. |
| Power measured at | 2200 rev / min |
| Maximum torque | 416.2 Nm |
| Aspiration | with water-cooling and turbocharging |
| Torque measured at | 1400 rev / min |
| Cylinders number | 4 |
Hydraulic system
| Type of pump | gear type pump |
| Pump bandwidth | 115.1 l/min |
| Overflow valve pressure | 22994 kPa |
| Lifting time | 6.4 sec |
| Unloading time | 1.9 sec |
| Lowering time | 3.1 sec |
Carrier
| Track shoe width | 457.2 mm |
| Track shoes number per side | 38 |
| Rolling bearings number on either side | 6 |
| Caterpillar track length on ground level | 2210 mm |
| Contact with ground area | 2 m2 |
| Specific ground pressure | 52 kPa |
| Track width | 1600 mm |
Images
Sizes
| 1. Length with bucket on ground level | 5383 mm |
| 2. Width to outside of caterpillar track | 2057 mm |
| 3. Height to cab upper part | 2998 mm |
| 5. Clearance | 408 mm |
| 7. Ground clearance at full height and unloading | 2679 mm |
| 8. Radius at high altitude unloading | 890 mm |
Carrier
| 9. Track width | 1600 mm |