Construction Machinery. Crawler-Mounted Loader John Deere 655C serie II

Sizes

Length to front of caterpillar track 4339 mm
Length with bucket on ground level 6132 mm
Width to outside of caterpillar track 2188 mm
Height to cab upper part 3129 mm
Clearance 395 mm
Ground clearance at full height and unloading 2827 mm
Radius at high altitude unloading 1072 mm

Operation

Hydraulic system fluid volume 130 l.
Static tipping load 10470 kg
Breakout force in folded state 123.1 kN
Bucket capacity with top 1.8 m3
Operating voltage 24 V
Generator current strength 55 amperes
Maximum speed 10.9 km/h
Working weight 15399.5 kg
Fuel Capacity 260 l.
Cooling system fluid volume 68 l.
Engine oil volume 20 l.
Each final drive fluid volume 8.5 l.

Motor

Manufacturer Liebherr
Model D 924 T-EA1
Effective power 96.9 kW
Displacement 6.7 l.
Power measured at 2000 rev / min
Maximum torque 610.1 Nm
Aspiration with water-cooling and turbocharging
Torque measured at 1200 rev / min
Cylinders number 4

Hydraulic system

Type of pump Variable displacement piston pump with load sensing proportional pump flow control
Pump bandwidth 155.2 l/min
Overflow valve pressure 25993.2 kPa
Lifting time 6.5 sec
Unloading time 1.5 sec
Lowering time 2.1 sec

Carrier

Track shoe width 508 mm
Track shoes number per side 42
Rolling bearings number on either side 6
Caterpillar track length on ground level 2478 mm
Contact with ground area 2.5 m2
Specific ground pressure 60 kPa
Track width 1680 mm

Images

Sizes

1. Length with bucket on ground level 6132 mm
2. Width to outside of caterpillar track 2188 mm
3. Height to cab upper part 3129 mm
5. Clearance 395 mm
7. Ground clearance at full height and unloading 2827 mm
8. Radius at high altitude unloading 1072 mm

Carrier

9. Track width 1680 mm