- Home/
- Specifications/
- Tracked Tractor/
- Case/
- 1150H LGP
Construction Machinery. Tracked Tractor Case 1150H LGP
Standard blade
| Width | 3150 mm |
| Height | 1118 mm |
| Volume | 3 m3 |
| Blade angle in both directions | 17 degrees |
| Cut depth | 483 mm |
Sizes
| Width between caterpillar tracks | 2740 mm |
| Height to cab upper part | 3020 mm |
| Caterpillar track length on ground level | 2460 mm |
| Clearance | 328 mm |
| Length with blade | 4910 mm |
Operation
| Working weight | 12274.2 kg |
| Fuel Capacity | 212 l. |
| Cooling system fluid volume | 27.4 l. |
| Engine oil volume | 15.1 l. |
| Hydraulic system fluid volume | 64.4 l. |
| Final drive fluid volume | 7.6 l. |
| Operating voltage | 12 V |
| Generator current strength | 65 amperes |
Motor
| Displacement | 5.9 l. |
| Torque measured at | 1600 rev / min |
| Cylinders number | 6 |
| Manufacturer | Case |
| Model | 6T-590 |
| Full power | 92.5 kW |
| Effective power | 88.7 kW |
| Power measured at | 2000 rev / min |
| Maximum torque | 504.4 Nm |
Hydraulic system
| Overflow valve pressure | 13789.5 kPa |
| Pump bandwidth | 132.1 l/min |
Gear box
| Transmission type | Case modulated powershift with full mesh |
| Forward gears number | 4 |
| Reverse gears number | 4 |
| Maximum forward speed | 9.3 km/h |
| Maximum reverse gear | 11.1 km/h |
Carrier
| Specific ground pressure | 0.2 kPa |
| Contact with ground area | 4.2 m2 |
| Standard shoe size | 863.6 mm |
| Track shoes number per side | 43 |
| Rolling bearings number on either side | 7 |
| Support rollers number on either side | 2 |
| Caterpillar track pitch | 170.2 mm |
| Track width | 1880 mm |
Images
Sizes
| 1. Length with blade | 4910 mm |
| 2. Width between caterpillar tracks | 2740 mm |
| 3. Height to cab upper part | 3020 mm |
| 4. Caterpillar track length on ground level | 2460 mm |
| 5. Clearance | 328 mm |
Carrier
| 8. Standard shoe size | 863.6 mm |
| 7. Track width | 1880 mm |