- Home/
- Specifications/
- Tracked Tractor/
- Caterpillar/
- D3C serie II
Construction Machinery. Tracked Tractor Caterpillar D3C serie II
Standard blade
| Width | 2413 mm |
| Height | 840 mm |
| Volume | 1.3 m3 |
| Blade angle in both directions | 25 degrees |
| Cut depth | 397 mm |
Sizes
| Length without blade | 2764 mm |
| Length with blade | 3740 mm |
| Width between caterpillar tracks | 1780 mm |
| Height to cab upper part | 2664 mm |
| Caterpillar track length on ground level | 1902 mm |
| Clearance | 294 mm |
Operation
| Engine oil volume | 12 l. |
| Hydraulic system fluid volume | 57 l. |
| Final drive fluid volume | 8 l. |
| Operating voltage | 12 V |
| Generator current strength | 40 amperes |
| Working weight | 7001 kg |
| Fuel Capacity | 121 l. |
| Cooling system fluid volume | 20 l. |
Motor
| Manufacturer | Caterpillar |
| Model | 3204 |
| Full power | 56.7 kW |
| Effective power | 52.2 kW |
| Power measured at | 2400 rev / min |
| Displacement | 5.2 l. |
| Cylinders number | 4 |
Hydraulic system
| Type of pump | Gear type pump with single section |
| Overflow valve pressure | 17236.9 kPa |
| Pump bandwidth | 55 l/min |
Gear box
| Transmission type | planetary powershift transmission |
| Forward gears number | 3 |
| Reverse gears number | 3 |
| Maximum forward speed | 10.7 km/h |
| Maximum reverse gear | 11.4 km/h |
Carrier
| Specific ground pressure | 49.6 kPa |
| Contact with ground area | 1.4 m2 |
| Standard shoe size | 356 mm |
| Track shoes number per side | 37 |
| Rolling bearings number on either side | 5 |
| Track width | 1420 mm |
Images
Sizes
| 1. Length with blade | 3740 mm |
| 2. Width between caterpillar tracks | 1780 mm |
| 3. Height to cab upper part | 2664 mm |
| 4. Caterpillar track length on ground level | 1902 mm |
| 5. Clearance | 294 mm |
| 6. Length without blade | 2764 mm |
Carrier
| 7. Track width | 1420 mm |
| 8. Standard shoe size | 356 mm |