- Home/
- Specifications/
- Tracked Tractor/
- Dressta/
- TD20M
Construction Machinery. Tracked Tractor Dressta TD20M
Standard blade
Width | 3860 mm |
Height | 1.6 mm |
Volume | 8.5 m3 |
Blade angle in both directions | 25 degrees |
Cut depth | 700 mm |
Sizes
Length without blade | 4340 mm |
Width between caterpillar tracks | 2890 mm |
Height to cab upper part | 3570 mm |
Clearance | 460 mm |
Operation
Engine oil volume | 23 l. |
Hydraulic system fluid volume | 133 l. |
Power unit fluid volume | 173 l. |
Final drive fluid volume | 38 l. |
Operating voltage | 12 V |
Generator current strength | 50 amperes |
Working weight | 24200 kg |
Fuel Capacity | 490 l. |
Cooling system fluid volume | 50 l. |
Motor
Manufacturer | Cummins |
Model | QSC8.3 |
Full power | 194 kW |
Effective power | 179 kW |
Power measured at | 2200 rev / min |
Displacement | 8.3 l. |
Torque measured at | 1500 rev / min |
Aspiration | Turbocharger with charge air cooling |
Cylinders number | 6 |
Hydraulic system
Type of pump | Numerous gear pumps, actuated with torque converter. |
Overflow valve pressure | 0 lb / sq. inch |
Pump bandwidth | 2.3 l/min |
Gear box
Transmission type | Powershift of modular camshaft, of electrohydraulic action |
Forward gears number | 3 |
Reverse gears number | 3 |
Maximum forward speed | 10.6 km/h |
Maximum reverse gear | 12.5 km/h |
Carrier
Specific ground pressure | 72.4 kPa |
Contact with ground area | 3.2 m2 |
Standard shoe size | 560 mm |
Track shoes number per side | 40 |
Rolling bearings number on either side | 6 |
Images
Sizes
2. Width between caterpillar tracks | 2890 mm |
3. Height to cab upper part | 3570 mm |
5. Clearance | 460 mm |
6. Length without blade | 4340 mm |
Carrier
8. Standard shoe size | 560 mm |