Construction Machinery. Tracked Tractor John Deere 1050C WH

Standard blade

Width	4200 mm
Height	2450 mm
Volume	21.2 m3
Blade angle in both directions	25 degrees
Cut depth	570 mm

Sizes

Length without blade	4885 mm
Width between caterpillar tracks	3145 mm
Height to cab upper part	3640 mm
Caterpillar track length on ground level	3174 mm
Clearance	625 mm

Operation

Power unit fluid volume	210 l.
Final drive fluid volume	21 l.
Operating voltage	24 V
Generator current strength	80 amperes
Working weight	35129 kg
Fuel Capacity	610 l.
Cooling system fluid volume	68 l.
Engine oil volume	24 l.
Hydraulic system fluid volume	210 l.

Motor

Manufacturer	Liebherr
Model	D 9406 TI-E A3
Effective power	241.6 kW
Power measured at	1800 rev / min
Maximum torque	1530.7 Nm
Displacement	13 l.
Torque measured at	1200 rev / min
Aspiration	Turbocharging with intercooler
Cylinders number	6

Hydraulic system

Type of pump	Variable displacement piston pump with load sensing proportional pump flow control
Overflow valve pressure	20000 kPa
Pump bandwidth	336 l/min

Gear box

Transmission type	Electronically controlled closed loop hydrostatic drive with a split power flow
Forward gears number	3
Reverse gears number	3
Maximum forward speed	11 km/h
Maximum reverse gear	11 km/h

Carrier

Specific ground pressure	89 kPa
Contact with ground area	3.9 m2
Track shoes number per side	44
Rolling bearings number on either side	7
Caterpillar track pitch	215 mm

Images

Sizes

2. Width between caterpillar tracks	3145 mm
3. Height to cab upper part	3640 mm
4. Caterpillar track length on ground level	3174 mm
5. Clearance	625 mm
6. Length without blade	4885 mm