Construction Machinery. Tracked Tractor John Deere 1050C

Standard blade

Width	4200 mm
Height	1650 mm
Volume	9.5 m3
Blade angle in both directions	degrees
Cut depth	570 mm

Sizes

Length without blade	4885 mm
Length with blade	6415 mm
Width between caterpillar tracks	2740 mm
Height to cab upper part	3640 mm
Caterpillar track length on ground level	3174 mm
Clearance	625 mm

Operation

Working weight	33560 kg
Fuel Capacity	610 l.
Cooling system fluid volume	68 l.
Engine oil volume	24 l.
Hydraulic system fluid volume	210 l.
Power unit fluid volume	210 l.
Final drive fluid volume	21 l.
Operating voltage	24 V
Generator current strength	55 amperes

Motor

Manufacturer	Liebherr
Model	D 9406 TI-E
Effective power	241.6 kW
Power measured at	1800 rev / min
Maximum torque	1530.7 Nm
Displacement	13 l.
Torque measured at	1200 rev / min
Cylinders number	6
Aspiration	Turbocharging with intercooler

Hydraulic system

Type of pump	Variable displacement piston pump with load sensing proportional pump flow control
Overflow valve pressure	20000 kPa
Pump bandwidth	336 l/min

Gear box

Transmission type	Electronically controlled closed loop hydrostatic drive with a split power flow
Forward gears number	3
Reverse gears number	3
Maximum forward speed	11 km/h
Maximum reverse gear	11 km/h

Carrier

Contact with ground area	3.6 m2
Standard shoe size	560 mm
Track shoes number per side	44
Rolling bearings number on either side	7
Caterpillar track pitch	215 mm
Track width	2180 mm
Specific ground pressure	93 kPa

Images

Sizes

1. Length with blade	6415 mm
2. Width between caterpillar tracks	2740 mm
3. Height to cab upper part	3640 mm
4. Caterpillar track length on ground level	3174 mm
5. Clearance	625 mm
6. Length without blade	4885 mm

Carrier

7. Track width	2180 mm
8. Standard shoe size	560 mm