- Home/
- Specifications/
- Tracked Tractor/
- John Deere/
- 450E/6415
Construction Machinery. Tracked Tractor John Deere 450E/6415
Standard blade
| Width | 2440 mm |
| Height | 813 mm |
| Blade angle in both directions | 25 degrees |
Sizes
| Height to cab upper part | 2560 mm |
| Caterpillar track length on ground level | 1850 mm |
| Clearance | 140 mm |
| Length without blade | 3605.8 mm |
Operation
| Working weight | 6655 kg |
| Fuel Capacity | 117.3 l. |
| Cooling system fluid volume | 15 l. |
| Engine oil volume | 14.2 l. |
| Hydraulic system fluid volume | 36 l. |
| Power unit fluid volume | 30.3 l. |
| Final drive fluid volume | 5.9 l. |
| Operating voltage | 12 V |
Motor
| Power measured at | 2100 rev / min |
| Maximum torque | 309.1 Nm |
| Displacement | 4.5 l. |
| Torque measured at | 1200 rev / min |
| Cylinders number | 4 |
| Aspiration | natural aspiration |
| Manufacturer | John Deere |
| Model | 4-276D |
| Full power | 54.4 kW |
| Effective power | 52.2 kW |
Hydraulic system
| Type of pump | gear type pump |
| Overflow valve pressure | 15514 kPa |
| Pump bandwidth | 1.5 l/min |
Gear box
| Transmission type | H-L-4: 4-speed ranges, with high, reduced reverse speed, switched hydraulically without a clutch in each range |
| Forward gears number | 4 |
| Reverse gears number | 4 |
| Maximum forward speed | 10.4 km/h |
| Maximum reverse gear | 9.9 km/h |
Carrier
| Specific ground pressure | 38.6 kPa |
| Contact with ground area | 1.7 m2 |
| Standard shoe size | 457 mm |
| Track shoes number per side | 36 |
| Rolling bearings number on either side | 1 |
| Caterpillar track pitch | 292 mm |
Images
Sizes
| 3. Height to cab upper part | 2560 mm |
| 4. Caterpillar track length on ground level | 1850 mm |
| 5. Clearance | 140 mm |
| 6. Length without blade | 3605.8 mm |
Carrier
| 8. Standard shoe size | 457 mm |
