Construction Machinery. Tracked Tractor John Deere 950C LT

Standard blade

Width 3965 mm
Height 1450 mm
Volume 7.2 m3
Blade angle in both directions 25 degrees
Cut depth 525 mm

Sizes

Length without blade 4300 mm
Width between caterpillar tracks 2974 mm
Height to cab upper part 3305 mm
Caterpillar track length on ground level 3275 mm
Clearance 482 mm

Operation

Working weight 23700 kg
Fuel Capacity 450 l.
Cooling system fluid volume 64.4 l.
Engine oil volume 25.5 l.
Hydraulic system fluid volume 178 l.
Power unit fluid volume 178 l.
Final drive fluid volume 14.5 l.
Operating voltage 24 V
Generator current strength 55 amperes

Motor

Manufacturer Liebherr
Model D 926 TI
Effective power 171.5 kW
Power measured at 1800 rev / min
Maximum torque 1080.6 Nm
Displacement 10 l.
Torque measured at 1300 rev / min
Aspiration Turbocharging with intercooler
Cylinders number 6

Hydraulic system

Type of pump Variable displacement piston pump with load sensing proportional pump flow control
Overflow valve pressure 16000 kPa
Pump bandwidth 292 l/min

Gear box

Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow
Forward gears number 3
Reverse gears number 3
Maximum forward speed 11 km/h
Maximum reverse gear 11 km/h

Carrier

Rolling bearings number on either side 8
Caterpillar track pitch 215.9 mm
Track width 1980 mm
Specific ground pressure 71 kPa
Contact with ground area 3.3 m2
Track shoes number per side 43

Images

Sizes

2. Width between caterpillar tracks 2974 mm
3. Height to cab upper part 3305 mm
4. Caterpillar track length on ground level 3275 mm
5. Clearance 482 mm
6. Length without blade 4300 mm

Carrier

7. Track width 1980 mm