Construction Machinery. Tracked Tractor John Deere 950C

Standard blade

Width	3965 mm
Height	1450 mm
Volume	7.2 m3
Blade angle in both directions	25 degrees
Cut depth	525 mm

Sizes

Length without blade	4300 mm
Length with blade	5680 mm
Width between caterpillar tracks	2489 mm
Height to cab upper part	3305 mm
Caterpillar track length on ground level	2960 mm
Clearance	482 mm

Operation

Working weight	22950 kg
Fuel Capacity	450 l.
Cooling system fluid volume	64.4 l.
Engine oil volume	25.5 l.
Hydraulic system fluid volume	178 l.
Power unit fluid volume	178 l.
Final drive fluid volume	14.5 l.
Operating voltage	24 V
Generator current strength	55 amperes

Motor

Manufacturer	Liebherr
Model	D926 TI
Effective power	171.5 kW
Power measured at	1800 rev / min
Maximum torque	1080.6 Nm
Displacement	10 l.
Torque measured at	1300 rev / min
Aspiration	Turbocharging with intercooler
Cylinders number	6

Hydraulic system

Type of pump	Variable displacement piston pump with load sensing proportional pump flow control
Overflow valve pressure	16000 kPa
Pump bandwidth	292 l/min

Gear box

Transmission type	Electronically controlled closed loop hydrostatic drive with a split power flow
Forward gears number	3
Reverse gears number	3
Maximum forward speed	11 km/h
Maximum reverse gear	11 km/h

Carrier

Contact with ground area	3 m2
Standard shoe size	508 mm
Track shoes number per side	39
Rolling bearings number on either side	7
Caterpillar track pitch	215.9 mm
Track width	1980 mm
Specific ground pressure	74.5 kPa

Images

Sizes

1. Length with blade	5680 mm
2. Width between caterpillar tracks	2489 mm
3. Height to cab upper part	3305 mm
4. Caterpillar track length on ground level	2960 mm
5. Clearance	482 mm
6. Length without blade	4300 mm

Carrier

7. Track width	1980 mm
8. Standard shoe size	508 mm