- Home/
- Specifications/
- Tracked Tractor/
- New Holland/
- D95B WT
Construction Machinery. Tracked Tractor New Holland D95B WT
Standard blade
| Cut depth | 483 mm |
| Width | 3050 mm |
| Height | 910 mm |
| Volume | 1.9 m3 |
| Blade angle in both directions | 25 degrees |
Sizes
| Length without blade | 3263 mm |
| Length with blade | 4258 mm |
| Width between caterpillar tracks | 2907 mm |
| Height to cab upper part | 2788 mm |
| Caterpillar track length on ground level | 2352 mm |
| Clearance | 369 mm |
Operation
| Working weight | 9163 kg |
| Fuel Capacity | 189 l. |
| Cooling system fluid volume | 22.5 l. |
| Engine oil volume | 12.3 l. |
| Hydraulic system fluid volume | 75.7 l. |
| Final drive fluid volume | 14.2 l. |
| Operating voltage | 12 V |
| Generator current strength | 65 amperes |
Motor
| Effective power | 71.6 kW |
| Power measured at | 2200 rev / min |
| Maximum torque | 400 Nm |
| Displacement | 4.5 l. |
| Torque measured at | 1400 rev / min |
| Cylinders number | 4 |
| Model | FPT 445TA/E66 |
| Full power | 73.8 kW |
Hydraulic system
| Type of pump | gear type pump |
| Pump bandwidth | 76.8 l/min |
Gear box
| Transmission type | Hydro-Static Transmission |
| Forward gears number | 10 |
| Reverse gears number | 10 |
| Maximum forward speed | 8.9 km/h |
| Maximum reverse gear | 8.9 km/h |
Carrier
| Specific ground pressure | 31.3 kPa |
| Standard shoe size | 610 mm |
| Track shoes number per side | 40 |
| Rolling bearings number on either side | 1 |
| Support rollers number on either side | 7 |
| Caterpillar track pitch | 171 mm |
| Track width | 1778 mm |
Images
Sizes
| 3. Height to cab upper part | 2788 mm |
| 4. Caterpillar track length on ground level | 2352 mm |
| 5. Clearance | 369 mm |
| 6. Length without blade | 3263 mm |
| 1. Length with blade | 4258 mm |
| 2. Width between caterpillar tracks | 2907 mm |
Carrier
| 7. Track width | 1778 mm |
| 8. Standard shoe size | 610 mm |