- Home/
- Specifications/
- Attached Equipment/
- Doosan/
- DL250TC
Construction Machinery. Attached Equipment Doosan DL250TC
Sizes
| Between tyres width | 2608 mm |
| Height to cab upper part | 3260 mm |
| Wheelbase | 3020 mm |
| Clearance | 410 mm |
| Length with bucket on ground level | 7995 mm |
| Unloading ground clearance at maximum lifting | 2700 mm |
| Radius at maximum height and unloading | 1330 mm |
| Length with forks on ground level | 8431 mm |
| Maximum lifting height | 3722 mm |
Shovel
| Breakout power | 127.5 kN |
| Brimmed bucket capacity | 2.5 m3 |
Operation
| Static bucket tipping load | 9808 kg |
| Static tipping forks load | 9070 kg |
| Tyre size | 20.5R25 |
| Working weight | 14099.9 kg |
| Fuel Capacity | 255 l. |
| Cooling system fluid volume | 45 l. |
| Engine oil volume | 27 l. |
| Transmission fluid volume | 45 l. |
| Front differential fluid volume | 31 l. |
| Rear differential fluid volume | 24 l. |
| Hydraulic system fluid volume | 158 l. |
| Turn radius | 5477 mm |
| Operating voltage | 24 V |
| Rear axle oscillating | 11 degrees |
Motor
| Manufacturer | Doosan |
| Model | DL06 |
| Full power | 120.8 kW |
| Effective power | 114.1 kW |
| Maximum torque | 804 Nm |
| Displacement | 5.9 l. |
| Aspiration | turbocharger and charge air cooling flow by oncoming air flow |
Hydraulic system
| Type of pump | vane pump with triple section |
| Overflow valve pressure | 19600 kPa |
| Lifting time | 5.4 sec |
| Unloading time | 1.3 sec |
| Lowering time | 3.3 sec |
Gear box
| Transmission type | powershift |
| Forward gears number | 4 |
| Reverse gears number | 3 |
| Maximum forward speed | 34 km/h |
| Maximum reverse gear | 23.5 km/h |
Images
Sizes
| 1. Length with bucket on ground level | 7995 mm |
| 2. Between tyres width | 2608 mm |
| 3. Height to cab upper part | 3260 mm |
| 4. Wheelbase | 3020 mm |
| 5. Clearance | 410 mm |
| 7. Unloading ground clearance at maximum lifting | 2700 mm |
| 10. Length with forks on ground level | 8431 mm |
| 11. Maximum lifting height | 3722 mm |