Construction Machinery. Grader Case 885B DHP

Steerage

Left and right hinge connection 25 degrees
Turn radius 7.3 m

Sizes

Height to cab upper part 3340 mm
Dimensional length 8534 mm
Between tyres width 2650 mm
Wheelbase 6219 mm
Blade base 2562 mm
Dual axis wheelbase 1624 mm
Rear ground clearance 380 mm
Front part clearance 622 mm

Operation

Rear differential/final drive fluid volume 39.7 l.
Circular gearbox fluid volume 2.8 l.
Each tandem case fluid volume 60.2 l.
Tyre size 20.5-25
Operating voltage 24 V
Generator current strength 90 amperes
Front axle standard operating weight 5668.1 kg
Rear axle standard operating weight 12687 kg
Overall standard operating weight 18355.1 kg
Fuel Capacity 340.7 l.
Oil system fluid volume 16.7 l.
Cooling system fluid volume 39.7 l.
Hydraulic system fluid volume 179.8 l.
Transmission fluid volume 22 l.

Motor

Manufacturer Case
Model FPT 6.7L
Power measured at 2200 rev / min
Effective speeds output 7-8 159.6 kW
Cylinders number 6
Effective drives torque 7-8 984.3 Nm
Displacement 6.7 l.
Aspiration Turbocharging with subsequent air cooling (by a cooling radiator)

Hydraulic system

Type of pump load sensing, pressure control, with locking in the middle position
Pump flow rate 185.5 l/min

Gear box

Transmission type powershift
Forward gears number 8
Reverse gears number 4
Maximum forward speed 43 km/h
Maximum reverse gear 30.6 km/h

Front Axle

Wheel tilt 20 degrees
General fluctuations 15.3 degrees
Clearance 622 mm

Dump

Mouldboard width 4267.2 mm
Mouldboard height 600 mm
Mouldboard thickness 22.2 mm
Maximum cutting depth 711.2 mm
Left lateral displacement 533.4 mm
Lateral right shift 685.8 mm
Lowered blade pressure 9606.2 kg

Circle

Rotating 360 degrees
Maximum lifting above ground level 444.5 mm
Diameter 1752.6 mm

Images

Sizes

1. Dimensional length 8534 mm
2. Between tyres width 2650 mm
3. Height to cab upper part 3340 mm
4. Wheelbase 6219 mm
5. Rear ground clearance 380 mm
6. Front part clearance 622 mm
7. Dual axis wheelbase 1624 mm
8. Blade base 2562 mm