- Home/
- Specifications/
- Grader/
- John Deere/
- 772B
Construction Machinery. Grader John Deere 772B
Steerage
| Left and right hinge connection | 25 degrees |
| Turn radius | 6.9 m |
Sizes
| Height to cab upper part | 3090 mm |
| Dimensional length | 8510 mm |
| Between tyres width | 2440 mm |
| Wheelbase | 5970 mm |
| Blade base | 2670 mm |
| Dual axis wheelbase | 1540 mm |
| Front part clearance | 572 mm |
Operation
| Overall standard operating weight | 14719.1 kg |
| Front axle maximum operating weight | 4830.8 kg |
| Rear axle maximum operating weight | 11829.7 kg |
| Total maximum operating weight | 16660.4 kg |
| Fuel Capacity | 340.7 l. |
| Oil system fluid volume | 24.6 l. |
| Cooling system fluid volume | 26.5 l. |
| Hydraulic system fluid volume | 87.1 l. |
| Circular gearbox fluid volume | 3.8 l. |
| Each tandem case fluid volume | 18.9 l. |
| Tyre size | 14.00-24 |
| Operating voltage | 24 V |
| Generator current strength | 42 amperes |
| Front axle standard operating weight | 4263.8 kg |
| Rear axle standard operating weight | 10455.3 kg |
Motor
| Manufacturer | John Deere |
| Model | 6466T |
| Power measured at | 2200 rev / min |
| Torque measured at | 1400 rev / min |
| Effective speeds output 7-8 | 115.6 kW |
| Cylinders number | 6 |
| Maximum power | 115.6 kW |
| Effective drives torque 7-8 | 650.8 Nm |
| Displacement | 7.6 l. |
| Aspiration | turbocharging |
Hydraulic system
| Type of pump | Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume |
| Pump flow rate | 198.4 l/min |
Gear box
| Transmission type | powershift |
| Forward gears number | 8 |
| Reverse gears number | 4 |
| Maximum forward speed | 40.6 km/h |
| Maximum reverse gear | 13.8 km/h |
Front Axle
| Wheel tilt | 20 degrees |
| General fluctuations | 32 degrees |
| Clearance | 572 mm |
Dump
| Mouldboard width | 3657.6 mm |
| Mouldboard height | 609.6 mm |
| Mouldboard thickness | 22.4 mm |
| Left lateral displacement | 683 mm |
| Lateral right shift | 683 mm |
Circle
| Diameter | 1520 mm |
| Rotating | 360 degrees |
| Left shift | 787 mm |
| Right shift | 724 mm |
| Maximum radius outside left tyres | 2160 mm |
| Right maximum radius outside tyres | 2110 mm |
| Maximum lifting above ground level | 470 mm |
| Blade tilt front angle | 49 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 8510 mm |
| 2. Between tyres width | 2440 mm |
| 3. Height to cab upper part | 3090 mm |
| 4. Wheelbase | 5970 mm |
| 6. Front part clearance | 572 mm |
| 7. Dual axis wheelbase | 1540 mm |
| 8. Blade base | 2670 mm |
