Construction Machinery. Grader John Deere JD770

Steerage

Left and right hinge connection	25 degrees
Turn radius	6.7 m

Sizes

Height to cab upper part	3200 mm
Dimensional length	8470 mm
Between tyres width	2440 mm
Wheelbase	5970 mm
Blade base	2720 mm
Dual axis wheelbase	1540 mm
Front part clearance	571 mm

Operation

Total maximum operating weight	15222.1 kg
Fuel Capacity	265 l.
Oil system fluid volume	20.8 l.
Cooling system fluid volume	37.9 l.
Hydraulic system fluid volume	117.3 l.
Circular gearbox fluid volume	2.8 l.
Each tandem case fluid volume	15.1 l.
Tyre size	14.00-24
Operating voltage	24 V
Front axle standard operating weight	3728.5 kg
Rear axle standard operating weight	9808.9 kg
Overall standard operating weight	13537.5 kg
Front axle maximum operating weight	3917.7 kg
Rear axle maximum operating weight	11336.2 kg

Motor

Manufacturer	John Deere
Power measured at	2200 rev / min
Torque measured at	1400 rev / min
Effective speeds output 7-8	105.9 kW
Cylinders number	6
Maximum power	105.9 kW
Effective drives torque 7-8	596.6 Nm
Displacement	8.7 l.
Aspiration	turbocharging

Hydraulic system

Type of pump	variable displacement with locking in the middle position
Pump flow rate	215.8 l/min
Overflow valve pressure	15513.2 kPa

Gear box

Transmission type	powershift
Forward gears number	8
Reverse gears number	4
Maximum forward speed	40.4 km/h
Maximum reverse gear	13.8 km/h

Front Axle

Wheel tilt	20 degrees
General fluctuations	30 degrees
Clearance	571 mm

Dump

Mouldboard width	3657.6 mm
Mouldboard height	609.6 mm
Mouldboard thickness	22.4 mm
Left lateral displacement	683 mm
Lateral right shift	683 mm

Circle

Rotating	360 degrees
Maximum radius outside left tyres	2340 mm
Right maximum radius outside tyres	2350 mm
Maximum lifting above ground level	432 mm
Diameter	1500 mm

Images

Sizes

1. Dimensional length	8470 mm
2. Between tyres width	2440 mm
3. Height to cab upper part	3200 mm
4. Wheelbase	5970 mm
6. Front part clearance	571 mm
7. Dual axis wheelbase	1540 mm
8. Blade base	2720 mm